lkml.org 
[lkml]   [2017]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/32] phy: meson8b-usb2: fix offsets for some of the registers
Date
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

The register offsets for REG_DBG_UART (and all following) were off by
0x4. This was not a problem yet because these registers are currently
not used by the driver.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/phy-meson8b-usb2.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/phy-meson8b-usb2.c b/drivers/phy/phy-meson8b-usb2.c
index 33c9f4ba157d..30f56a6a411f 100644
--- a/drivers/phy/phy-meson8b-usb2.c
+++ b/drivers/phy/phy-meson8b-usb2.c
@@ -81,9 +81,9 @@
#define REG_ADP_BC_ACA_PIN_GND BIT(25)
#define REG_ADP_BC_ACA_PIN_FLOAT BIT(26)

-#define REG_DBG_UART 0x14
+#define REG_DBG_UART 0x10

-#define REG_TEST 0x18
+#define REG_TEST 0x14
#define REG_TEST_DATA_IN_MASK GENMASK(3, 0)
#define REG_TEST_EN_MASK GENMASK(7, 4)
#define REG_TEST_ADDR_MASK GENMASK(11, 8)
@@ -93,7 +93,7 @@
#define REG_TEST_DATA_OUT_MASK GENMASK(19, 16)
#define REG_TEST_DISABLE_ID_PULLUP BIT(20)

-#define REG_TUNE 0x1c
+#define REG_TUNE 0x18
#define REG_TUNE_TX_RES_TUNE_MASK GENMASK(1, 0)
#define REG_TUNE_TX_HSXV_TUNE_MASK GENMASK(3, 2)
#define REG_TUNE_TX_VREF_TUNE_MASK GENMASK(7, 4)
--
2.11.0
\
 
 \ /
  Last update: 2017-04-10 15:26    [W:0.182 / U:1.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site