lkml.org 
[lkml]   [2017]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/32] phy: exynos4: Remove duplicated defines of PHY register defines
Date
From: Krzysztof Kozlowski <krzk@kernel.org>

Phy drivers access PMU region through regmap provided by exynos-pmu
driver. However there is no need to duplicate defines for PMU
registers. Instead just use whatever is defined in exynos-regs-pmu.h.

Additionally MIPI PHY registers for Exynos5433 start from the same
address as Exynos4 and Exynos5250 so re-use existing defines.

This reduces number of defines and allows removal of one header file.

Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/phy-exynos-mipi-video.c | 12 ++++++------
include/linux/mfd/syscon/exynos5-pmu.h | 3 ---
include/linux/soc/samsung/exynos-regs-pmu.h | 9 ++++++++-
3 files changed, 14 insertions(+), 10 deletions(-)

diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
index 6bee04cc4d53..d7fe1f8c3ac8 100644
--- a/drivers/phy/phy-exynos-mipi-video.c
+++ b/drivers/phy/phy-exynos-mipi-video.c
@@ -12,7 +12,6 @@
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
-#include <linux/mfd/syscon/exynos4-pmu.h>
#include <linux/mfd/syscon/exynos5-pmu.h>
#include <linux/module.h>
#include <linux/of.h>
@@ -21,6 +20,7 @@
#include <linux/phy/phy.h>
#include <linux/regmap.h>
#include <linux/spinlock.h>
+#include <linux/soc/samsung/exynos-regs-pmu.h>
#include <linux/mfd/syscon.h>

enum exynos_mipi_phy_id {
@@ -173,7 +173,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
/* EXYNOS_MIPI_PHY_ID_CSIS0 */
.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
.enable_val = EXYNOS5_PHY_ENABLE,
- .enable_reg = EXYNOS5433_MIPI_PHY0_CONTROL,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
.enable_map = EXYNOS_MIPI_REGMAP_PMU,
.resetn_val = BIT(0),
.resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON,
@@ -182,7 +182,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
/* EXYNOS_MIPI_PHY_ID_DSIM0 */
.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
.enable_val = EXYNOS5_PHY_ENABLE,
- .enable_reg = EXYNOS5433_MIPI_PHY0_CONTROL,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
.enable_map = EXYNOS_MIPI_REGMAP_PMU,
.resetn_val = BIT(0),
.resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY,
@@ -191,7 +191,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
/* EXYNOS_MIPI_PHY_ID_CSIS1 */
.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
.enable_val = EXYNOS5_PHY_ENABLE,
- .enable_reg = EXYNOS5433_MIPI_PHY1_CONTROL,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
.enable_map = EXYNOS_MIPI_REGMAP_PMU,
.resetn_val = BIT(1),
.resetn_reg = EXYNOS5433_SYSREG_CAM0_MIPI_DPHY_CON,
@@ -200,7 +200,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
/* EXYNOS_MIPI_PHY_ID_DSIM1 */
.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
.enable_val = EXYNOS5_PHY_ENABLE,
- .enable_reg = EXYNOS5433_MIPI_PHY1_CONTROL,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
.enable_map = EXYNOS_MIPI_REGMAP_PMU,
.resetn_val = BIT(1),
.resetn_reg = EXYNOS5433_SYSREG_DISP_MIPI_PHY,
@@ -209,7 +209,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
/* EXYNOS_MIPI_PHY_ID_CSIS2 */
.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
.enable_val = EXYNOS5_PHY_ENABLE,
- .enable_reg = EXYNOS5433_MIPI_PHY2_CONTROL,
+ .enable_reg = EXYNOS4_MIPI_PHY_CONTROL(2),
.enable_map = EXYNOS_MIPI_REGMAP_PMU,
.resetn_val = BIT(0),
.resetn_reg = EXYNOS5433_SYSREG_CAM1_MIPI_DPHY_CON,
diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h
index c28ff21ca4d2..77c93551ee58 100644
--- a/include/linux/mfd/syscon/exynos5-pmu.h
+++ b/include/linux/mfd/syscon/exynos5-pmu.h
@@ -38,9 +38,6 @@

/* Exynos5433 specific register definitions */
#define EXYNOS5433_USBHOST30_PHY_CONTROL (0x728)
-#define EXYNOS5433_MIPI_PHY0_CONTROL (0x710)
-#define EXYNOS5433_MIPI_PHY1_CONTROL (0x714)
-#define EXYNOS5433_MIPI_PHY2_CONTROL (0x718)

#define EXYNOS5_PHY_ENABLE BIT(0)
#define EXYNOS5_MIPI_PHY_S_RESETN BIT(1)
diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
index 49df0a01a2cc..e57d75889a09 100644
--- a/include/linux/soc/samsung/exynos-regs-pmu.h
+++ b/include/linux/soc/samsung/exynos-regs-pmu.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2010-2015 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS - Power management unit definition
@@ -50,6 +50,13 @@
#define S5P_WAKEUP_MASK 0x0608
#define S5P_WAKEUP_MASK2 0x0614

+/* MIPI_PHYn_CONTROL, valid for Exynos3250, Exynos4, Exynos5250 and Exynos5433 */
+#define EXYNOS4_MIPI_PHY_CONTROL(n) (0x0710 + (n) * 4)
+#define EXYNOS4_MIPI_PHY_ENABLE (1 << 0)
+#define EXYNOS4_MIPI_PHY_SRESETN (1 << 1)
+#define EXYNOS4_MIPI_PHY_MRESETN (1 << 2)
+#define EXYNOS4_MIPI_PHY_RESET_MASK (3 << 1)
+
#define S5P_INFORM0 0x0800
#define S5P_INFORM1 0x0804
#define S5P_INFORM5 0x0814
--
2.11.0
\
 
 \ /
  Last update: 2017-04-10 15:24    [W:0.130 / U:0.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site