lkml.org 
[lkml]   [2017]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 05/32] phy: sun4i-usb: change PHYCTL register clearing code
Date
From: Icenowy Zheng <icenowy@aosc.xyz>

It seems that all SoCs with the PHYCTL register offset as 0x10 need the
PHYCTL register to be cleared before it's written.

Change PHYCTL register clearing code to judge whether clearing is needed
based on the PHYCTL offset.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/phy-sun4i-usb.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index a21b5f24a340..62b4d25448c6 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -188,10 +188,8 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,

spin_lock_irqsave(&phy_data->reg_lock, flags);

- if (phy_data->cfg->type == sun8i_a33_phy ||
- phy_data->cfg->type == sun50i_a64_phy ||
- phy_data->cfg->type == sun8i_v3s_phy) {
- /* A33 or A64 needs us to set phyctl to 0 explicitly */
+ if (phy_data->cfg->phyctl_offset == REG_PHYCTL_A33) {
+ /* SoCs newer than A33 need us to set phyctl to 0 explicitly */
writel(0, phyctl);
}

--
2.11.0
\
 
 \ /
  Last update: 2017-04-10 15:19    [W:0.133 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site