lkml.org 
[lkml]   [2017]   [Apr]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] mfd: arizona: Add GPIO maintain state flag
On Fri, Apr 07, 2017 at 01:38:44PM +0100, Charles Keepax wrote:
> The Arizona devices only maintain the state of output GPIOs whilst the
> CODEC is active, this can cause issues if the CODEC suspends whilst
> something is relying on the state of one of its GPIOs. However, in
> many systems the CODEC GPIOs are used for audio related features
> and thus the state of the GPIOs is unimportant whilst the CODEC is
> suspended. Often keeping the CODEC resumed in such a system would
> incur a power impact that is unacceptable.
>
> Add a flag through the second cell of the GPIO specifier in device
> tree, to allow the user to select whether a GPIO being configured as
> an output should keep the CODEC resumed.

If the whole codec can't be suspended, why does this need to be per
GPIO? You could just have a single boolean property.

>
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
> Documentation/devicetree/bindings/mfd/arizona.txt | 5 ++++-
> include/dt-bindings/mfd/arizona.h | 3 +++
> 2 files changed, 7 insertions(+), 1 deletion(-)

\
 
 \ /
  Last update: 2017-04-10 22:18    [W:0.068 / U:6.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site