lkml.org 
[lkml]   [2017]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] watchdog: sp5100_tco: Synchronize I/O port accesses
Date
From: Böszörményi Zoltán <zboszor@pr.hu>

Use the new header and the mutex from usb/host/pci-quirks.c

This change will allow accesses to the SB800 I/O port pair
synchronized with the PCI quirk when isochronous USB transfers
are performed and with i2c-piix4.

At the same time, remove the request_region() call to reserve
these I/O ports, similarly to i2c-piix4 so the code is now uniform
across the three individual drivers.

Signed-off-by: Zoltán Böszörményi <zboszor@pr.hu>
---
drivers/watchdog/sp5100_tco.c | 24 +++++++++++-------------
drivers/watchdog/sp5100_tco.h | 10 ++++++----
2 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
index 028618c..dc125df 100644
--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -48,7 +48,6 @@
static u32 tcobase_phys;
static u32 tco_wdt_fired;
static void __iomem *tcobase;
-static unsigned int pm_iobase;
static DEFINE_SPINLOCK(tco_lock); /* Guards the hardware */
static unsigned long timer_alive;
static char tco_expect_close;
@@ -138,6 +137,8 @@ static void tco_timer_enable(void)

if (!tco_has_sp5100_reg_layout(sp5100_tco_pci)) {
/* For SB800 or later */
+ enter_sb800();
+
/* Set the Watchdog timer resolution to 1 sec */
outb(SB800_PM_WATCHDOG_CONFIG, SB800_IO_PM_INDEX_REG);
val = inb(SB800_IO_PM_DATA_REG);
@@ -150,6 +151,8 @@ static void tco_timer_enable(void)
val |= SB800_PCI_WATCHDOG_DECODE_EN;
val &= ~SB800_PM_WATCHDOG_DISABLE;
outb(val, SB800_IO_PM_DATA_REG);
+
+ leave_sb800();
} else {
/* For SP5100 or SB7x0 */
/* Enable watchdog decode bit */
@@ -164,11 +167,13 @@ static void tco_timer_enable(void)
val);

/* Enable Watchdog timer and set the resolution to 1 sec */
+ enter_sb800();
outb(SP5100_PM_WATCHDOG_CONTROL, SP5100_IO_PM_INDEX_REG);
val = inb(SP5100_IO_PM_DATA_REG);
val |= SP5100_PM_WATCHDOG_SECOND_RES;
val &= ~SP5100_PM_WATCHDOG_DISABLE;
outb(val, SP5100_IO_PM_DATA_REG);
+ leave_sb800();
}
}

@@ -361,16 +366,10 @@ static unsigned char sp5100_tco_setupdevice(void)
base_addr = SB800_PM_WATCHDOG_BASE;
}

- /* Request the IO ports used by this driver */
- pm_iobase = SP5100_IO_PM_INDEX_REG;
- if (!request_region(pm_iobase, SP5100_PM_IOPORTS_SIZE, dev_name)) {
- pr_err("I/O address 0x%04x already in use\n", pm_iobase);
- goto exit;
- }
-
/*
* First, Find the watchdog timer MMIO address from indirect I/O.
*/
+ enter_sb800();
outb(base_addr+3, index_reg);
val = inb(data_reg);
outb(base_addr+2, index_reg);
@@ -380,6 +379,7 @@ static unsigned char sp5100_tco_setupdevice(void)
outb(base_addr+0, index_reg);
/* Low three bits of BASE are reserved */
val = val << 8 | (inb(data_reg) & 0xf8);
+ leave_sb800();

pr_debug("Got 0x%04x from indirect I/O\n", val);

@@ -400,6 +400,7 @@ static unsigned char sp5100_tco_setupdevice(void)
SP5100_SB_RESOURCE_MMIO_BASE, &val);
} else {
/* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
+ enter_sb800();
outb(SB800_PM_ACPI_MMIO_EN+3, SB800_IO_PM_INDEX_REG);
val = inb(SB800_IO_PM_DATA_REG);
outb(SB800_PM_ACPI_MMIO_EN+2, SB800_IO_PM_INDEX_REG);
@@ -408,6 +409,7 @@ static unsigned char sp5100_tco_setupdevice(void)
val = val << 8 | inb(SB800_IO_PM_DATA_REG);
outb(SB800_PM_ACPI_MMIO_EN+0, SB800_IO_PM_INDEX_REG);
val = val << 8 | inb(SB800_IO_PM_DATA_REG);
+ leave_sb800();
}

/* The SBResource_MMIO is enabled and mapped memory space? */
@@ -429,7 +431,7 @@ static unsigned char sp5100_tco_setupdevice(void)
pr_debug("SBResource_MMIO is disabled(0x%04x)\n", val);

pr_notice("failed to find MMIO address, giving up.\n");
- goto unreg_region;
+ goto exit;

setup_wdt:
tcobase_phys = val;
@@ -469,8 +471,6 @@ static unsigned char sp5100_tco_setupdevice(void)

unreg_mem_region:
release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
-unreg_region:
- release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
exit:
return 0;
}
@@ -517,7 +517,6 @@ static int sp5100_tco_init(struct platform_device *dev)
exit:
iounmap(tcobase);
release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
- release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
return ret;
}

@@ -531,7 +530,6 @@ static void sp5100_tco_cleanup(void)
misc_deregister(&sp5100_tco_miscdev);
iounmap(tcobase);
release_mem_region(tcobase_phys, SP5100_WDT_MEM_MAP_SIZE);
- release_region(pm_iobase, SP5100_PM_IOPORTS_SIZE);
}

static int sp5100_tco_remove(struct platform_device *dev)
diff --git a/drivers/watchdog/sp5100_tco.h b/drivers/watchdog/sp5100_tco.h
index 2b28c00..f5d9402 100644
--- a/drivers/watchdog/sp5100_tco.h
+++ b/drivers/watchdog/sp5100_tco.h
@@ -6,6 +6,8 @@
* TCO timer driver for sp5100 chipsets
*/

+#include <linux/sb800.h>
+
/*
* Some address definitions for the Watchdog
*/
@@ -24,8 +26,8 @@
*/

/* For SP5100/SB7x0 chipset */
-#define SP5100_IO_PM_INDEX_REG 0xCD6
-#define SP5100_IO_PM_DATA_REG 0xCD7
+#define SP5100_IO_PM_INDEX_REG SB800_PIIX4_SMB_IDX
+#define SP5100_IO_PM_DATA_REG SB800_PIIX4_SMB_DATA

#define SP5100_SB_RESOURCE_MMIO_BASE 0x9C

@@ -45,8 +47,8 @@


/* For SB8x0(or later) chipset */
-#define SB800_IO_PM_INDEX_REG 0xCD6
-#define SB800_IO_PM_DATA_REG 0xCD7
+#define SB800_IO_PM_INDEX_REG SB800_PIIX4_SMB_IDX
+#define SB800_IO_PM_DATA_REG SB800_PIIX4_SMB_DATA

#define SB800_PM_ACPI_MMIO_EN 0x24
#define SB800_PM_WATCHDOG_CONTROL 0x48
--
2.9.3
\
 
 \ /
  Last update: 2017-04-01 12:08    [W:0.055 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site