lkml.org 
[lkml]   [2017]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] usb: pci-quirks: Add a header for SB800 I/O ports and mutex for locking
On Sat, Apr 01, 2017 at 01:02:21PM +0200, Zoltan Boszormenyi wrote:
> From: Böszörményi Zoltán <zboszor@pr.hu>
>
> This patch adds:
> * a mutex in the USB PCI quirks code for synchronizing access to
> the I/O ports on SB800
> * a new header that contains symbols for the index and data I/O ports
> and wrappers for locking and unlocking the mutex.
> * locking around the I/O port access for SB800
>
> Signed-off-by: Zoltan Boszormenyi <zboszor@pr.hu>
> ---
> drivers/usb/host/pci-quirks.c | 14 ++++++++++----
> include/linux/sb800.h | 15 +++++++++++++++
> 2 files changed, 25 insertions(+), 4 deletions(-)
> create mode 100644 include/linux/sb800.h
>
> diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
> index a9a1e4c..9b0445c 100644
> --- a/drivers/usb/host/pci-quirks.c
> +++ b/drivers/usb/host/pci-quirks.c
> @@ -15,6 +15,7 @@
> #include <linux/export.h>
> #include <linux/acpi.h>
> #include <linux/dmi.h>
> +#include <linux/sb800.h>
> #include "pci-quirks.h"
> #include "xhci-ext-caps.h"
>
> @@ -279,6 +280,9 @@ bool usb_amd_prefetch_quirk(void)
> }
> EXPORT_SYMBOL_GPL(usb_amd_prefetch_quirk);
>
> +DEFINE_MUTEX(sb800_mutex);
> +EXPORT_SYMBOL_GPL(sb800_mutex);
> +
> /*
> * The hardware normally enables the A-link power management feature, which
> * lets the system lower the power consumption in idle states.
> @@ -314,11 +318,13 @@ static void usb_amd_quirk_pll(int disable)
> if (amd_chipset.sb_type.gen == AMD_CHIPSET_SB800 ||
> amd_chipset.sb_type.gen == AMD_CHIPSET_HUDSON2 ||
> amd_chipset.sb_type.gen == AMD_CHIPSET_BOLTON) {
> - outb_p(AB_REG_BAR_LOW, 0xcd6);
> - addr_low = inb_p(0xcd7);
> - outb_p(AB_REG_BAR_HIGH, 0xcd6);
> - addr_high = inb_p(0xcd7);
> + enter_sb800();
> + outb_p(AB_REG_BAR_LOW, SB800_PIIX4_SMB_IDX);
> + addr_low = inb_p(SB800_PIIX4_SMB_DATA);
> + outb_p(AB_REG_BAR_HIGH, SB800_PIIX4_SMB_IDX);
> + addr_high = inb_p(SB800_PIIX4_SMB_DATA);
> addr = addr_high << 8 | addr_low;
> + leave_sb800();
>
> outl_p(0x30, AB_INDX(addr));
> outl_p(0x40, AB_DATA(addr));
> diff --git a/include/linux/sb800.h b/include/linux/sb800.h
> new file mode 100644
> index 0000000..5650b7d
> --- /dev/null
> +++ b/include/linux/sb800.h
> @@ -0,0 +1,15 @@
> +
> +#ifndef SB800_H
> +#define SB800_H
> +
> +#include <linux/mutex.h>
> +
> +#define SB800_PIIX4_SMB_IDX 0xcd6
> +#define SB800_PIIX4_SMB_DATA 0xcd7
> +
> +extern struct mutex sb800_mutex;
> +
> +#define enter_sb800() mutex_lock(&sb800_mutex)
> +#define leave_sb800() mutex_unlock(&sb800_mutex)

Don't hide the mutex, just spell it out in the code itself. No need for
these defines at all.

thanks,

greg k-h

\
 
 \ /
  Last update: 2017-04-01 16:16    [W:0.151 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site