lkml.org 
[lkml]   [2017]   [Mar]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [bdi_unregister] 165a5e22fa INFO: task swapper:1 blocked for more than 120 seconds.
On Tue 07-03-17 17:26:56, Jan Kara wrote:
> On Tue 07-03-17 08:10:29, James Bottomley wrote:
> > On Tue, 2017-03-07 at 15:41 +0100, Jan Kara wrote:
> > > On Mon 06-03-17 09:25:42, James Bottomley wrote:
> > > > On Mon, 2017-03-06 at 17:13 +0100, Jan Kara wrote:
> > > > > On Mon 06-03-17 07:44:55, James Bottomley wrote:
> > > ...
> > > > > > > Sure. The call trace is:
> > > > > > >
> > > > > > > [ 41.919244] ------------[ cut here ]------------
> > > > > > > [ 41.919263] WARNING: CPU: 4 PID: 2335 at
> > > > > > > drivers/scsi/sd.c:3332
> > > > > > > sd_shutdown+0x2f/0x100
> > > > > > > [ 41.919268] Modules linked in: scsi_debug(+) netconsole
> > > > > > > loop btrfs raid6_pq zlib_deflate lzo_compress xor
> > > > > > > [ 41.919319] CPU: 4 PID: 2335 Comm: modprobe Not tainted
> > > > > > > 4.11.0-rc1-xen+ #49
> > > > > > > [ 41.919325] Hardware name: Bochs Bochs, BIOS Bochs
> > > > > > > 01/01/2011
> > > > > > > [ 41.919331] Call Trace:
> > > > > > > [ 41.919343] dump_stack+0x8e/0xf0
> > > > > > > [ 41.919354] __warn+0x116/0x120
> > > > > > > [ 41.919361] warn_slowpath_null+0x1d/0x20
> > > > > > > [ 41.919368] sd_shutdown+0x2f/0x100
> > > > > > > [ 41.919374] sd_remove+0x70/0xd0
> > > > > > >
> > > > > > > *** Here is the unexpected step I guess...
> > > > > > >
> > > > > > > [ 41.919383] driver_probe_device+0xe0/0x4c0
> > > > > >
> > > > > > Exactly. It's this, I think
> > > > > >
> > > > > > bool test_remove =
> > > > > > IS_ENABLED(CONFIG_DEBUG_TEST_DRIVER_REMOVE)
> > > > > > &&
> > > > > > !drv->suppress_bind_attrs;
> > > > > >
> > > > > > You have that config option set.
> > > > >
> > > > > Yes - or better said 0-day testing has it set. Maybe that is not
> > > > > a sane default for 0-day tests? The option is explicitely marked
> > > > > as "unstable"... Fengguang?
> > > > >
> > > > > > So the drivers base layer is calling ->remove after probe and
> > > > > > triggering the destruction of the queue.
> > > > > >
> > > > > > What to do about this (apart from nuke such a stupid option) is
> > > > > > somewhat more problematic.
> > > > >
> > > > > I guess this is between you and Greg :).
> > > >
> > > > Nice try, sport ... you qualify just behind Dan in the "not my
> > > > problem" olympic hurdles event. I'm annoyed because there's no
> > > > indication in the log that the driver add behaviour is radically
> > > > altered, so I've been staring at the wrong code for weeks.
> > > > However, the unbind/rebind should work, so the real issue is that
> > > > your bdi changes (or perhaps something else in block) have induced
> > > > a regression in the unbinding of upper layer drivers. If you're
> > > > going to release the bdi in del_gendisk, you have to have some
> > > > mechanism for re-acquiring it on re-probe (likely with the same
> > > > name) otherwise rebind is broken for every block driver.
> > >
> > > So my patch does not release bdi in del_gendisk(). Bdi has two
> > > initialization / destruction phases (similarly to request queue). You
> > > allocate and initialize bdi through bdi_init(), then you call
> > > bdi_register() to register it (which happens in device_add_disk()).
> > > On shutdown you have to first call bdi_unregister() (used to be
> > > called from blk_cleanup_queue(), my patch moved it to del_gendisk()).
> > > After that the last reference to bdi may be dropped which does final
> > > bdi destruction.
> > >
> > > So do I understand correctly that SCSI may call device_add_disk(),
> > > del_gendisk() repeatedly for the same request queue?
> >
> > Yes. The upper drivers (sd, sr, st and sg) follow a device model.
> > They can thus be bound and unbound many times during the lifetime of a
> > SCSI device.
> >
> > > If yes, then indeed I have a bug to fix... But gendisk seems to get
> > > allocated from scratch on each probe so we don't call
> > > device_add_disk(), del_gendisk() more times on the same disk, right?
> >
> > Right, gendisk, being a generic representation of a disk is a property
> > of the upper layer drivers. We actually cheat and use it in all of
> > them (including the apparent character ones, they use alloc_disk,
> > put_disk but not add_disk). So it has to be freed when the driver is
> > unbound and reallocated when it is bound. It's the fundamental entity
> > which embeds the SCSI upper layer driver lifetime.
> >
> > > > The fact that the second rebind tried with a different name
> > > > indicates that sd_devt_release wasn't called, so some vestige of
> > > > the devt remains on the subsequent rebind.
> > >
> > > Yep, I guess that's caused by Dan's patch (commit 0dba1314d4f8 now)
> > > which calls put_disk_devt() only in blk_cleanup_queue() which, if I
> > > understood you correctly, does not get called during unbind-bind
> > > cycle? In fact Dan's patch would end up leaking devt's because of
> > > repeated device_add_disk() calls for the same request queue...
> >
> > That's a bit unfortunate.
> >
> > > > Here's the problem: the queue belongs to SCSI (the lower layer), so
> > > > it's not going to change because it doesn't see the release. The
> > > > gendisk and its allied stuff belongs to sd so it gets freed and re
> > > > -created for the same queue. Something in block is very confused
> > > > when this happens.
> > >
> > > Yep, I think the binding of request queue to different gendisks is
> > > something I or Dan did not expect.
> >
> > OK, so I think we now understand why this is happening ... the question
> > is what we do about it? Is it fixable or do we need to go back to
> > basics? The fundamental property which got broken by these patches is
> > the idea of the separation of the lifecycles of the queue and the
> > gendisk. The only requirement is that the queue must exist before the
> > gendisk is created and must be destroyed after it. This doesn't forbid
> > there being many gendisk lifetimes over one queue lifetime and this is
> > what we rely on for the SCSI driver model. We rarely get called on it
> > because unbind/rebind of a ULD is rarely done in production (it's
> > mostly a devtest thing).
>
> For now I think it's fixable. Let's see what I'll be able to come up with.
> Let me also note that before my patch moving bdi_unregister() to
> del_gendisk() (commit 165a5e22fafb), the SCSI driver model was buggy in a
> different way - because bdi_unregister() was called only from
> blk_cleanup_queue(), we were leaking bdi->owner reference to gendisk by
> repeated calls to bdi_register_owner() from device_add_disk() and
> thus gendisks were never freed after unbind/bind (I've actually verified
> this bug exists with debug messages). Also as a result request queue use
> count was steadily increasing with each new gendisk and request queue could
> never get freed after unbind / rebind.
>
> My patch silently fixed this leakage but introduced a different set of
> problems which I'll try to fix.

Attached patch fixes the problem for me. If I also revert commit
0dba1314d4f81115dce711292ec7981d17231064 "scsi, block: fix duplicate bdi
name registration crashes" which is not needed with my
165a5e22fafb127ecb5914e12e8c32a1f0d3f820 "block: Move bdi_unregister() to
del_gendisk()", the device names also do not get incremented and I end up
with 'sda' device (otherwise I end up with sdc).

Honza
--
Jan Kara <jack@suse.com>
SUSE Labs, CR
From bfbccf28853d55d4418401d8eeb6b91c3050e316 Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Tue, 7 Mar 2017 18:01:51 +0100
Subject: [PATCH] block: Allow bdi re-registration

SCSI can call device_add_disk() several times for one request queue when
a device in unbound and bound, creating new gendisk each time. This will
lead to bdi being repeatedly registered and unregistered. Make sure
bdi_unregister() cleans up bdi in such a way that it is prepared for
the following bdi register call.

An easy way to provoke this behavior is to enable
CONFIG_DEBUG_TEST_DRIVER_REMOVE and use scsi_debug driver to create a
scsi disk which immediately hangs without this fix.

Signed-off-by: Jan Kara <jack@suse.cz>
---
mm/backing-dev.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 6d861d090e9f..6ac932210f56 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -710,6 +710,11 @@ static void cgwb_bdi_destroy(struct backing_dev_info *bdi)
*/
atomic_dec(&bdi->usage_cnt);
wait_event(cgwb_release_wait, !atomic_read(&bdi->usage_cnt));
+ /*
+ * Grab back our reference so that we hold it when @bdi gets
+ * re-registered.
+ */
+ atomic_inc(&bdi->usage_cnt);
}

/**
@@ -857,6 +862,8 @@ int bdi_register_owner(struct backing_dev_info *bdi, struct device *owner)
MINOR(owner->devt));
if (rc)
return rc;
+ /* Leaking owner reference... */
+ WARN_ON(bdi->owner);
bdi->owner = owner;
get_device(owner);
return 0;
--
2.10.2
\
 
 \ /
  Last update: 2017-03-08 11:01    [W:1.140 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site