lkml.org 
[lkml]   [2017]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] drm: use .hword to represent 16-bit numbers
Date
The size of .word is the size of a word in the given platform, which
for intel systems is 16-bits but other architectures use different
sizes. However, .hword emits 16-bit numbers regardless of the
platform (and despite the name). The quantities specified in EDID are
platform independent, so they should work in spite of the default
target of the cc you are using, so use .hword where EDID specifies
16-bit numbers.

Cc: Carsten Emde <C.Emde@osadl.org>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Javi Merino <javi.merino@kernel.org>
---
Documentation/EDID/edid.S | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/EDID/edid.S b/Documentation/EDID/edid.S
index 7ac0327..ef082dc 100644
--- a/Documentation/EDID/edid.S
+++ b/Documentation/EDID/edid.S
@@ -59,9 +59,9 @@
/* Fixed header pattern */
header: .byte 0x00,0xff,0xff,0xff,0xff,0xff,0xff,0x00

-mfg_id: .word swap16(mfgname2id(MFG_LNX1, MFG_LNX2, MFG_LNX3))
+mfg_id: .hword swap16(mfgname2id(MFG_LNX1, MFG_LNX2, MFG_LNX3))

-prod_code: .word 0
+prod_code: .hword 0

/* Serial number. 32 bits, little endian. */
serial_number: .long SERIAL
@@ -177,7 +177,7 @@ std_vres: .byte (XY_RATIO<<6)+VFREQ-60

descriptor1:
/* Pixel clock in 10 kHz units. (0.-655.35 MHz, little-endian) */
-clock: .word CLOCK/10
+clock: .hword CLOCK/10

/* Horizontal active pixels 8 lsbits (0-4095) */
x_act_lsb: .byte XPIX&0xff
--
2.1.4
\
 
 \ /
  Last update: 2017-03-06 15:38    [W:0.043 / U:1.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site