lkml.org 
[lkml]   [2017]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: Add documentation for GP10B GPU
Date
GP10B's definition is mostly similar to GK20A's and GM20B's. The only
noticeable difference is the use of power domains instead of a regulator
for power supply.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
---
.../devicetree/bindings/gpu/nvidia,gk20a.txt | 25 +++++++++++++++++++++-
1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
index ff3db65e50de..b7e4c7444510 100644
--- a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
+++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
@@ -5,6 +5,7 @@ Required properties:
Currently recognized values:
- nvidia,gk20a
- nvidia,gm20b
+ - nvidia,gp10b
- reg: Physical base address and length of the controller's registers.
Must contain two entries:
- first entry for bar0
@@ -14,7 +15,8 @@ Required properties:
- interrupt-names: Must include the following entries:
- stall
- nonstall
-- vdd-supply: regulator for supply voltage.
+- vdd-supply: regulator for supply voltage. Only required for GPUs not using
+ power domains.
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
@@ -27,6 +29,8 @@ is also required:
See ../reset/reset.txt for details.
- reset-names: Must include the following entries:
- gpu
+- power-domains: GPUs that make use of power domains can define this property
+ instead of vdd-supply. Currently "nvidia,gp10b" makes use of this.

Optional properties:
- iommus: A reference to the IOMMU. See ../iommu/iommu.txt for details.
@@ -68,3 +72,22 @@ Example for GM20B:
iommus = <&mc TEGRA_SWGROUP_GPU>;
status = "disabled";
};
+
+Example for GP10B:
+
+ gpu@17000000 {
+ compatible = "nvidia,gp10b";
+ reg = <0x0 0x17000000 0x0 0x1000000>,
+ <0x0 0x18000000 0x0 0x1000000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "stall", "nonstall";
+ clocks = <&bpmp TEGRA186_CLK_GPCCLK>,
+ <&bpmp TEGRA186_CLK_GPU>;
+ clock-names = "gpu", "pwr";
+ resets = <&bpmp TEGRA186_RESET_GPU>;
+ reset-names = "gpu";
+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
+ iommus = <&smmu TEGRA186_SID_GPU>;
+ status = "disabled";
+ };
--
2.12.0
\
 
 \ /
  Last update: 2017-03-30 11:19    [W:0.090 / U:1.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site