lkml.org 
[lkml]   [2017]   [Mar]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/3] Documentation: bindings: add DT documentation for u2phy and u2phy grf
From
Date


On 2017/3/3 14:21, Rob Herring wrote:
> On Thu, Mar 02, 2017 at 03:49:04PM +0800, Meng Dongyang wrote:
>> Due to the u2phy registers are separated from general grf, we need to
>> add u2phy grf node and place u2phy node in it. So this patch add u2phy
>> grf node.
> Similar comment on the subject.
>
>> Changes in v2:
>> - add u2phy grf specification
>>
>> Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com>
>> ---
>> Documentation/devicetree/bindings/soc/rockchip/grf.txt | 15 +++++++++++++++
>> 1 file changed, 15 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
>> index 013e71a..6ac23f9 100644
>> --- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt
>> +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
>> @@ -7,6 +7,9 @@ From RK3368 SoCs, the GRF is divided into two sections,
>> - GRF, used for general non-secure system,
>> - PMUGRF, used for always on system
>>
>> +On RK3328 SoCs, the GRF is divided into three sections,
>> +except GRF and PMUGRF, add a section for USB2PHYGRF,
>> +
>> Required Properties:
>>
>> - compatible: GRF should be one of the followings
>> @@ -19,6 +22,8 @@ Required Properties:
>> - compatible: PMUGRF should be one of the followings
>> - "rockchip,rk3368-pmugrf", "syscon": for rk3368
>> - "rockchip,rk3399-pmugrf", "syscon": for rk3399
>> +- compatible: USB2GRF should be one of the followings
>> + - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328
>> - reg: physical base address of the controller and length of memory mapped
>> region.
>>
>> @@ -33,3 +38,13 @@ Example: GRF and PMUGRF of RK3399 SoCs
>> compatible = "rockchip,rk3399-grf", "syscon";
>> reg = <0x0 0xff770000 0x0 0x10000>;
>> };
>> +
>> +Example: USB2GRF of RK3328 SoCs
>> +
>> + usb2phy_grf: syscon@ff450000 {
>> + compatible = "rockchip,rk3328-usb2phy-grf", "syscon",
>> + "simple-mfd";
> simple-mfd is not documented. Do you have child nodes?
do you mean we need to add a child node of phy here?
>
> What makes this a syscon? It has non-PHY registers?
rk3328 devides grf into three parts and we put all u2phy registers into
the part of u2phy grf,
so here we add a simple usb2phy_grf.
>
>
>> + reg = <0x0 0xff450000 0x0 0x10000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + };
>> --
>> 1.9.1
>>
>>
>
>


\
 
 \ /
  Last update: 2017-03-03 07:55    [W:0.095 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site