lkml.org 
[lkml]   [2017]   [Mar]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] mmc: core: Do not hold re-tuning during CMD6 commands
[...]

>> Below is the fail log of suspend fail.
>> the normal command tune result should be 0xffffff9ff, but some time, we
>> get the tune result of 0xffffffff, then we choose the 10 as the best
>> tune parameter, which is not stable.
>> I know that we should focus on why we get the result of 0xffffffff, this
>> may be result of device/host timing shifting while tuning. but what I
>> want to do is that when get a response CRC error, we can do re-tune to
>> recovery it, but not only return the -84 and cause suspend fail
>> eventually. if all hardware are perfect, then we don't need the re-tune
>> mechanism.
>
> Thanks for elaborating!
>
> Can you please also tell exactly which of the CMD6 commands in the
> suspend sequence that is triggering this problem? Cache flush? Power
> off notification?

You didn't answer this question. I would really like to know the
sequence of the commands you see that are being sent to the card
during suspend. And of course in particular what command that fails.

[...]

Kind regards
Uffe

\
 
 \ /
  Last update: 2017-03-29 12:36    [W:0.074 / U:0.932 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site