lkml.org 
[lkml]   [2017]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2,3/3] tty/serial: meson_uart: add the core clock handling to the driver
Date
This patch gets the core clock as provided by the DT and enables it.
The code was taken from Amlogic's serial driver, and was tested on my
board.

Signed-off-by: Helmut Klein <hgkr.klein@gmail.com>
---
drivers/tty/serial/meson_uart.c | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 60f16795d16b..cb99112288eb 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -600,6 +600,7 @@ static int meson_uart_probe(struct platform_device *pdev)
struct resource *res_mem, *res_irq;
struct uart_port *port;
struct clk *clk;
+ struct clk *core_clk;
int ret = 0;

if (pdev->dev.of_node)
@@ -625,6 +626,15 @@ static int meson_uart_probe(struct platform_device *pdev)
if (!port)
return -ENOMEM;

+ core_clk = devm_clk_get(&pdev->dev, "core");
+ if (!IS_ERR(core_clk)) {
+ ret = clk_prepare_enable(core_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "couldn't enable clkc\n");
+ return ret;
+ }
+ }
+
clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(clk))
return PTR_ERR(clk);
--
2.11.0
\
 
 \ /
  Last update: 2017-03-28 11:29    [W:0.081 / U:0.864 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site