lkml.org 
[lkml]   [2017]   [Mar]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [v6 PATCH 00/21] x86: Enable User-Mode Instruction Prevention
From
Date
On Tue, 2017-03-14 at 00:25 +0300, Stas Sergeev wrote:
> 11.03.2017 02:59, Ricardo Neri пишет:
> > On Fri, 2017-03-10 at 14:33 +0300, Stas Sergeev wrote:
> >
> >> Why would you need one?
> >> Or do you really want to allow these instructions
> >> in v86 by the means of emulation? If so - this wasn't
> >> clearly stated in the patch description, neither it was
> >> properly discussed, it seems.
> > It str and sldt can be emulated in vm86 but as Andy mention, the
> > behavior sould be the same with and without emulation.
> Why would you do that?
> I looked up the dosemu2 CPU simulator code that
> is used under x86-64. It says this:

Stas, I apologize for the delayed reply; I missed your e-mail.
> ---
> CODE_FLUSH();
> if (REALMODE()) goto illegal_op;
> PC += ModRMSim(PC+1, mode) + 1;
> error("SLDT not implemented\n");
> break;
> case 1: /* STR */
> /* Store Task Register */
> CODE_FLUSH();
> if (REALMODE()) goto illegal_op;
> PC += ModRMSim(PC+1, mode) + 1;
> error("STR not implemented\n");
> break;
> ...
> case 0: /* SGDT */
> /* Store Global Descriptor Table
> Register */
> PC++; PC += ModRM(opc, PC,
> mode|DATA16|MSTORE);
> error("SGDT not implemented\n");
> break;
> case 1: /* SIDT */
> /* Store Interrupt Descriptor Table
> Register */
> PC++; PC += ModRM(opc, PC,
> mode|DATA16|MSTORE);
> error("SIDT not implemented\n");
> break;
> ---
>
> It only implements smsw.
> So maybe you can make your code much
> simpler and remove the unneeded emulation?
> Same is for prot mode.

Do you mean the unneeded emulation for SLDT and STR?

> You know the wine's
> requirements now - they are very small. And
> dosemu doesn't need anything at all but smsw.
> And even smsw is very rare.
But emulation is still needed for SMSW, right?

The majority of my patches deal with computing the effective based on
the instruction operands and linear addresses based on the effective
address and the segment descriptor. Only two or three patches deal with
identifying particular UMIP-protected instructions. Not having to worry
about STR and SLDT in vm86 could simplify things a bit, though.

Thanks and BR,
Ricardo


\
 
 \ /
  Last update: 2017-03-28 01:47    [W:1.661 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site