Messages in this thread | | | From | Patrick Menschel <> | Subject | [PATCH v2 0/2] ARM: dts: sunxi: Add CAN node and can0_pins_a pinctrl setting | Date | Fri, 24 Mar 2017 22:52:17 +0100 |
| |
The Allwinner A10/A20 SoCs have an on-board CAN (Controller Area Network) controller. This patch adds the CAN core to the SoC's include files, sun4i-a10.dtsi and sun7i-a20.dtsi.
On linux-can mailing list was a discussion about updating the device tree bindings https://lkml.org/lkml/2015/9/17/220 but it did not progress past writing the documentation file. Documentation/devicetree/bindings/net/can/sun4i_can.txt
The CAN controller can be enabled in a board specific dts file as described in the documentation file or by using a device tree overlay.
I have tested the patch v2 on a Banana Pi (A20 SoC) with mainline kernel 4.10.5.
History: v2: changed can0_pins_a node contents to new generic binding method, changed can0_pins_a node position by alphabetical order, changed can0 device node position by rising physical address order
v1: initial
Patrick Menschel (2): ARM: dts: sun4i: Add CAN node and can0_pins_a pinctrl settings ARM: dts: sun7i: Add CAN node and can0_pins_a pinctrl settings
arch/arm/boot/dts/sun4i-a10.dtsi | 13 +++++++++++++ arch/arm/boot/dts/sun7i-a20.dtsi | 13 +++++++++++++ 2 files changed, 26 insertions(+)
-- 1.9.1
| |