Messages in this thread | | | From | Bartosz Golaszewski <> | Date | Fri, 24 Mar 2017 16:22:50 +0100 | Subject | Re: [PATCH v2 2/2] ata: ahci: add support for DaVinci DM816 SATA controller |
| |
2017-03-14 12:04 GMT+01:00 Bartosz Golaszewski <bgolaszewski@baylibre.com>: > This SATA controller is quite similar to the one present on the DA850 > SoC, but the PHY configuration is different and it supports two HBA > ports. > > The IP suffers from the same PMP issue the DA850 does - if we enable > PMP but don't use it - softreset fails. Appropriate workaround was > implemented in this driver as well. > > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> > --- > drivers/ata/Kconfig | 9 +++ > drivers/ata/Makefile | 1 + > drivers/ata/ahci_dm816.c | 200 +++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 210 insertions(+) > create mode 100644 drivers/ata/ahci_dm816.c >
Hi Tejun,
the DT bindings have been acked by Rob Herring and Tony Lindgren has picked up the arch/arm patches. If there are no objections, could you merge this driver and DT bindings for 4.12?
Thanks, Bartosz
| |