lkml.org 
[lkml]   [2017]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] MIPS: NI 169445 board support
On Thu, Mar 23, 2017 at 05:29:45PM -0500, Rob Herring wrote:
> On Tue, Mar 14, 2017 at 11:13:23AM -0500, Nathan Sullivan wrote:
> > Support the National Instruments 169445 board.
> >
> > Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
> > ---
> > Documentation/devicetree/bindings/mips/ni.txt | 7 ++
> > MAINTAINERS | 8 ++
> > arch/mips/boot/dts/Makefile | 1 +
> > arch/mips/boot/dts/ni/169445.dts | 100 ++++++++++++++++++++++++
> > arch/mips/boot/dts/ni/Makefile | 7 ++
> > arch/mips/configs/generic/board-ni169445.config | 27 +++++++
> > arch/mips/generic/Kconfig | 6 ++
> > arch/mips/generic/vmlinux.its.S | 25 ++++++
> > 8 files changed, 181 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/mips/ni.txt
> > create mode 100644 arch/mips/boot/dts/ni/169445.dts
> > create mode 100644 arch/mips/boot/dts/ni/Makefile
> > create mode 100644 arch/mips/configs/generic/board-ni169445.config
> >
> > diff --git a/Documentation/devicetree/bindings/mips/ni.txt b/Documentation/devicetree/bindings/mips/ni.txt
> > new file mode 100644
> > index 0000000..722bf2d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mips/ni.txt
> > @@ -0,0 +1,7 @@
> > +National Instruments MIPS platforms
> > +
> > +required root node properties:
> > + - compatible: must be "ni,169445"
> > +
> > +CPU Nodes
> > + - compatible: must be "mti,mips14KEc"
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index c265a5f..b72f059 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -8887,6 +8887,14 @@ F: include/linux/sunrpc/
> > F: include/uapi/linux/nfs*
> > F: include/uapi/linux/sunrpc/
> >
> > +NI169445 MIPS ARCHITECTURE
> > +M: Nathan Sullivan <nathan.sullivan@ni.com>
> > +L: linux-mips@linux-mips.org
> > +S: Maintained
> > +F: arch/mips/boot/dts/ni/
> > +F: arch/mips/configs/generic/board-ni169445.config
> > +F: Documentation/devicetree/bindings/mips/ni.txt
> > +
> > NILFS2 FILESYSTEM
> > M: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
> > L: linux-nilfs@vger.kernel.org
> > diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
> > index b9db492..27b0f37 100644
> > --- a/arch/mips/boot/dts/Makefile
> > +++ b/arch/mips/boot/dts/Makefile
> > @@ -4,6 +4,7 @@ dts-dirs += img
> > dts-dirs += ingenic
> > dts-dirs += lantiq
> > dts-dirs += mti
> > +dts-dirs += ni
> > dts-dirs += netlogic
> > dts-dirs += pic32
> > dts-dirs += qca
> > diff --git a/arch/mips/boot/dts/ni/169445.dts b/arch/mips/boot/dts/ni/169445.dts
> > new file mode 100644
> > index 0000000..9746576
> > --- /dev/null
> > +++ b/arch/mips/boot/dts/ni/169445.dts
> > @@ -0,0 +1,100 @@
> > +/dts-v1/;
> > +
> > +/ {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + compatible = "ni,169445";
> > +
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + cpu@0 {
> > + device_type = "cpu";
> > + compatible = "mti,mips14KEc";
> > + clocks = <&baseclk>;
> > + reg = <0>;
> > + };
> > + };
> > +
> > + memory@0 {
> > + device_type = "memory";
> > + reg = <0x0 0x10000000>;
> > + };
> > +
> > + baseclk: baseclock {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <50000000>;
> > + };
> > +
> > + cpu_intc: cpu_intc {
>
> interrupt-controller {
>
> > + #address-cells = <0>;
> > + compatible = "mti,cpu-interrupt-controller";
> > + interrupt-controller;
> > + #interrupt-cells = <1>;
> > + };
> > +
> > + ahb@0 {
>
> ahb@1f300000
>
> > + compatible = "simple-bus";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0x0 0x1f300000 0x80FFF>;
> > +
> > + gpio1:gpio-controller@1f300010 {
> ^ space
>
> 'gpio' is the standard node name, so
>
> gpio@...
>
> > + compatible = "ni,169445-nand-gpio";
> > + reg = <0x10 0x4>;
> > + reg-names = "dat";
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + };
> > +
> > + gpio2:gpio-controller@1f300014 {
>
> ditto
>
> > + compatible = "ni,169445-nand-gpio";
> > + reg = <0x14 0x4>;
> > + reg-names = "dat";
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + no-output;
> > + };
> > +
> > + nand@1f300000 {
> > + compatible = "gpio-control-nand";
> > + nand-on-flash-bbt;
> > + nand-ecc-mode = "soft_bch";
> > + nand-ecc-step-size = <512>;
> > + nand-ecc-strength = <4>;
> > + reg = <0x0 4>;
> > + gpios = <&gpio2 0 0>, /* rdy */
> > + <&gpio1 1 0>, /* nce */
> > + <&gpio1 2 0>, /* ale */
> > + <&gpio1 3 0>, /* cle */
> > + <&gpio1 4 0>; /* nwp */
> > + };
> > +
> > + serial@1f380000 {
> > + compatible = "ns16550a";
> > + reg = <0x80000 0x1000>;
> > + interrupt-parent = <&cpu_intc>;
> > + interrupts = <6>;
> > + clocks = <&baseclk>;
> > + reg-shift = <0>;
> > + };
> > +
> > + ethernet@1f340000 {
> > + compatible = "snps,dwmac-4.10a";
> > + interrupt-parent = <&cpu_intc>;
> > + interrupts = <5>;
> > + interrupt-names = "macirq";
> > + reg = <0x40000 0x2000>;
> > + clock-names = "stmmaceth", "pclk";
> > + clocks = <&baseclk>, <&baseclk>;
> > +
> > + phy-mode = "rgmii";
> > +
> > + fixed-link {
> > + speed = <1000>;
> > + full-duplex;
> > + };
> > + };
> > + };
> > +};
> > diff --git a/arch/mips/boot/dts/ni/Makefile b/arch/mips/boot/dts/ni/Makefile
> > new file mode 100644
> > index 0000000..66cfdff
> > --- /dev/null
> > +++ b/arch/mips/boot/dts/ni/Makefile
> > @@ -0,0 +1,7 @@
> > +dtb-$(CONFIG_FIT_IMAGE_FDT_NI169445) += 169445.dtb
> > +
> > +# Force kbuild to make empty built-in.o if necessary
> > +obj- += dummy.o
> > +
> > +always := $(dtb-y)
> > +clean-files := *.dtb *.dtb.S
> > diff --git a/arch/mips/configs/generic/board-ni169445.config b/arch/mips/configs/generic/board-ni169445.config
> > new file mode 100644
> > index 0000000..0bae1f8
> > --- /dev/null
> > +++ b/arch/mips/configs/generic/board-ni169445.config
> > @@ -0,0 +1,27 @@
> > +CONFIG_FIT_IMAGE_FDT_NI169445=y
> > +
> > +CONFIG_SERIAL_8250=y
> > +CONFIG_SERIAL_8250_CONSOLE=y
> > +CONFIG_SERIAL_OF_PLATFORM=y
> > +
> > +CONFIG_GPIOLIB=y
> > +CONFIG_GPIO_SYSFS=y
> > +CONFIG_GPIO_GENERIC_PLATFORM=y
> > +
> > +CONFIG_MTD=y
> > +CONFIG_MTD_BLOCK=y
> > +CONFIG_MTD_CMDLINE_PARTS=y
> > +
> > +CONFIG_MTD_NAND_ECC=y
> > +CONFIG_MTD_NAND_ECC_BCH=y
> > +CONFIG_MTD_NAND=y
> > +CONFIG_MTD_NAND_GPIO=y
> > +CONFIG_MTD_NAND_IDS=y
> > +
> > +CONFIG_MTD_UBI=y
> > +CONFIG_MTD_UBI_BLOCK=y
> > +
> > +CONFIG_NETDEVICES=y
> > +CONFIG_STMMAC_ETH=y
> > +CONFIG_STMMAC_PLATFORM=y
> > +CONFIG_DWMAC_GENERIC=y
> > diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
> > index a606b3f..fbf0813 100644
> > --- a/arch/mips/generic/Kconfig
> > +++ b/arch/mips/generic/Kconfig
> > @@ -16,4 +16,10 @@ config LEGACY_BOARD_SEAD3
> > Enable this to include support for booting on MIPS SEAD-3 FPGA-based
> > development boards, which boot using a legacy boot protocol.
> >
> > +config FIT_IMAGE_FDT_NI169445
> > + bool "Include FDT for NI 169445"
> > + help
> > + Enable this to include the FDT for the 169445 platform from
> > + National Instruments in the FIT kernel image.
> > +
> > endif
> > diff --git a/arch/mips/generic/vmlinux.its.S b/arch/mips/generic/vmlinux.its.S
> > index f67fbf1..de851f7 100644
> > --- a/arch/mips/generic/vmlinux.its.S
> > +++ b/arch/mips/generic/vmlinux.its.S
> > @@ -29,3 +29,28 @@
> > };
> > };
> > };
> > +
> > +#ifdef CONFIG_FIT_IMAGE_FDT_NI169445
> > +/ {
>
> IMO, this shouldn't be in the kernel. Is the kernel supposed to
> create board specific images for every bootloaders custom format? It
> doesn't scale.
>

This is how the linux MIPS tree is doing generic kernels. Ralf, care to
elaborate?

The format is the same for each board, just with different trees and
configurations. It's a little odd with just one board right now, the
linux-mti tree has a bigger set.

> > + images {
> > + fdt@ni169445 {
> > + description = "NI 169445 device tree";
> > + data = /incbin/("boot/dts/ni/169445.dtb");
> > + type = "flat_dt";
> > + arch = "mips";
> > + compression = "none";
> > + hash@0 {
> > + algo = "sha1";
> > + };
> > + };
> > + };
> > +
> > + configurations {
> > + conf@ni169445 {
> > + description = "NI 169445 Linux Kernel";
> > + kernel = "kernel@0";
> > + fdt = "fdt@ni169445";
> > + };
> > + };
> > +};
> > +#endif
> > --
> > 2.1.4
> >

\
 
 \ /
  Last update: 2017-03-24 15:48    [W:0.108 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site