lkml.org 
[lkml]   [2017]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 0/8] gpio: acpi: Make it working
From
Date
On 03/23/17 21:46, Andy Shevchenko wrote:
> After this series it's possible to use GPIO pins for input (interrupt)
> which were configured as output by BIOS by some reason. It's a crucial
> functionality for IoT open connected boards where user may choose any of
> available pin for almost any of available function, including GPIO input
> (interrupt).
>
> Current bad behaviour was first reported by Jarkko Nikula few months ago.
>
It was actually due HW reset default is input buffer disabled and BIOS
didn't touch that pin at all if I recall correctly.

For the set:
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

\
 
 \ /
  Last update: 2017-03-24 14:52    [W:0.194 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site