Messages in this thread | | | Subject | Re: [PATCH v7 5/6] i2c: designware: add SLAVE mode functions | From | Jarkko Nikula <> | Date | Wed, 22 Mar 2017 17:02:04 +0200 |
| |
On 03/20/17 13:10, Luis Oliveira wrote: > - Changes in Kconfig to enable I2C_DESIGNWARE_SLAVE support > - Slave functions added to core library file > - Slave abort sources added to common source file > - New driver: i2c-designware-slave added > - Changes in the Makefile to compile the I2C_DESIGNWARE_SLAVE module > when supported by the architecture. > > All the SLAVE flow is added but it is not enabled via platform > driver. > > Signed-off-by: Luis Oliveira <lolivei@synopsys.com> > --- > v6-v7 > - changed error description in [ABRT_SLAVE_RD_INTX]. @Jarkko > - moved "bool mode;" comment/description to this patch > > drivers/i2c/busses/Kconfig | 14 +- > drivers/i2c/busses/Makefile | 1 + > drivers/i2c/busses/i2c-designware-common.c | 6 + > drivers/i2c/busses/i2c-designware-core.h | 4 + > drivers/i2c/busses/i2c-designware-slave.c | 403 +++++++++++++++++++++++++++++ > 5 files changed, 427 insertions(+), 1 deletion(-) > create mode 100644 drivers/i2c/busses/i2c-designware-slave.c > > diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig > index 8adc0f1d7ad0..f23575da67fd 100644 > --- a/drivers/i2c/busses/Kconfig > +++ b/drivers/i2c/busses/Kconfig > @@ -474,11 +474,23 @@ config I2C_DESIGNWARE_PLATFORM > depends on (ACPI && COMMON_CLK) || !ACPI > help > If you say yes to this option, support will be included for the > - Synopsys DesignWare I2C adapter. Only master mode is supported. > + Synopsys DesignWare I2C adapter. > > This driver can also be built as a module. If so, the module > will be called i2c-designware-platform. > > +config I2C_DESIGNWARE_SLAVE > + bool "Synopsys DesignWare Slave" > + select I2C_SLAVE > + select I2C_SLAVE_EEPROM > + depends on I2C_DESIGNWARE_PLATFORM > + help > + If you say yes to this option, support will be included for the > + Synopsys DesignWare I2C slave adapter. > + > + This is not a standalone module, this module compiles together with > + i2c-designware-core. > + > config I2C_DESIGNWARE_PCI > tristate "Synopsys DesignWare PCI" > depends on PCI > diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile > index c89a4314c563..678cf6f4a552 100644 > --- a/drivers/i2c/busses/Makefile > +++ b/drivers/i2c/busses/Makefile > @@ -41,6 +41,7 @@ obj-$(CONFIG_I2C_CPM) += i2c-cpm.o > obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o > obj-$(CONFIG_I2C_DESIGNWARE_CORE) += i2c-designware-core.o > i2c-designware-core-objs := i2c-designware-common.o i2c-designware-master.o > +i2c-designware-core-$(CONFIG_I2C_DESIGNWARE_SLAVE) += i2c-designware-slave.o > obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o > i2c-designware-platform-objs := i2c-designware-platdrv.o > i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o > diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c > index 6357c7c78f6d..5cc089ad9e19 100644 > --- a/drivers/i2c/busses/i2c-designware-common.c > +++ b/drivers/i2c/busses/i2c-designware-common.c > @@ -56,6 +56,12 @@ static char *abort_sources[] = { > "trying to use disabled adapter", > [ARB_LOST] = > "lost arbitration", > + [ABRT_SLAVE_FLUSH_TXFIFO] = > + "read command so flush old data in the TX FIFO", > + [ABRT_SLAVE_ARBLOST] = > + "slave lost the bus while transmitting data to a remote master", > + [ABRT_SLAVE_RD_INTX] = > + "incorrect slave-transmitter mode configuration", > }; > > u32 dw_readl(struct dw_i2c_dev *dev, int offset) > diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h > index 33087e640f69..08072dbe0ff4 100644 > --- a/drivers/i2c/busses/i2c-designware-core.h > +++ b/drivers/i2c/busses/i2c-designware-core.h > @@ -225,6 +225,7 @@ > * @disable: function to disable the controller > * @disable_int: function to disable all interrupts > * @init: function to initialize the I2C hardware > + * @mode: operation mode - I2C slave or I2C master > * > * HCNT and LCNT parameters can be used if the platform knows more accurate > * values than the one computed based only on the input clock frequency. > @@ -278,6 +279,7 @@ struct dw_i2c_dev { > void (*disable)(struct dw_i2c_dev *dev); > void (*disable_int)(struct dw_i2c_dev *dev); > int (*init)(struct dw_i2c_dev *dev); > + bool mode; > }; > "bool mode" is not self explaining. Let it either be int which then get value DW_IC_MASTER or DW_IC_SLAVE or use "bool master" or "bool slave" with boolean value. Should actually move to patch 6/6 as it's used there.
-- Jarkko
| |