lkml.org 
[lkml]   [2017]   [Mar]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v9 15/15] irqchip: mbigen: Add ACPI support
From
Date
On 21/03/2017 14:45, Lorenzo Pieralisi wrote:
> On Tue, Mar 07, 2017 at 08:40:10PM +0800, Hanjun Guo wrote:
>> From: Hanjun Guo <hanjun.guo@linaro.org>
>>
>> With the preparation of platform msi support and interrupt producer
>> in DSDT, we can add mbigen ACPI support now.
>>
>> We are using Interrupt resource type in _CRS methd to indicate number
>> of irq pins instead of num_pins in DT to avoid _DSD usage in this case.
>>
>> For mbigen,
>> Device(MBI0) {
>> Name(_HID, "HISI0152")
>> Name(_UID, Zero)
>> Name(_CRS, ResourceTemplate() {
>> Memory32Fixed(ReadWrite, 0xa0080000, 0x10000)
>> Interrupt(ResourceProducer,...) {12,14,....}
>
> What do these interrupt numbers represent ? This looks wrong to me.
> An interrupt descriptor is there to describe the interrupts a device
> can generate; you are using it just to add a "standard" (that is
> not standard at all) way of counting the number of vectors allocated
> to this specific chip and that's just wrong.
>

As I understand, the count of interrupts we are declaring for the mbigen
is the same as the sum of interrupts for that mbigen's children.

So at the point we probe the mbigen, can we just deference the children
to count their interrupts, and use this as the #msis?

> Can't you use something like Agustin did in the QCOM combiner:
>
> drivers/irqchip/qcom-irq-combiner.c
>
> to detect the MSI vector length (ie by describing the MBIgen through
> generic registers and use the bit width to compute the vector
> lenght) ? I am not sure how feasible it is given that my knowledge
> of MBIgen is pretty poor.
>
> I understand we want to avoid _DSD properties but we should not
> work around standard bindings to achieve that goal.
>

We use "num-pins" for dt solution, but it is not so welcome here.

> Side effect: IIUC the kernel will allocate an array of resources for
> your MBIgen interrupts whose size equal the Interrupt descriptor,
> which is as bad as it can get given that those resources are to
> the best of my knowledge unused.
>

Much appreciated,
John

> Lorenzo
>
>> })
>> }
>>
>> For devices,
>> Device(COM0) {
>> Name(_HID, "ACPIIDxx")
>> Name(_UID, Zero)
>> Name(_CRS, ResourceTemplate() {
>> Memory32Fixed(ReadWrite, 0xb0030000, 0x10000)
>> Interrupt(ResourceConsumer,..., "\_SB.MBI0") {12}
>> })
>> }
>>
>> With the help of platform msi and interrupt producer, then devices
>> will get the virq from mbigen's irqdomain.
>>
>> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
>> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
>> Cc: Ma Jun <majun258@huawei.com>
>> Cc: Marc Zyngier <marc.zyngier@arm.com>
>> Cc: Thomas Gleixner <tglx@linutronix.de>
>> ---
>> drivers/irqchip/irq-mbigen.c | 70 ++++++++++++++++++++++++++++++++++++++++++--
>> 1 file changed, 67 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c
>> index 3756408..e6bb503 100644
>> --- a/drivers/irqchip/irq-mbigen.c
>> +++ b/drivers/irqchip/irq-mbigen.c
>> @@ -16,6 +16,7 @@
>> * along with this program. If not, see <http://www.gnu.org/licenses/>.
>> */
>>
>> +#include <linux/acpi.h>
>> #include <linux/interrupt.h>
>> #include <linux/irqchip.h>
>> #include <linux/module.h>
>> @@ -180,7 +181,7 @@ static int mbigen_domain_translate(struct irq_domain *d,
>> unsigned long *hwirq,
>> unsigned int *type)
>> {
>> - if (is_of_node(fwspec->fwnode)) {
>> + if (is_of_node(fwspec->fwnode) || is_acpi_device_node(fwspec->fwnode)) {
>> if (fwspec->param_count != 2)
>> return -EINVAL;
>>
>> @@ -271,6 +272,54 @@ static int mbigen_of_create_domain(struct platform_device *pdev,
>> return 0;
>> }
>>
>> +#ifdef CONFIG_ACPI
>> +static acpi_status mbigen_acpi_process_resource(struct acpi_resource *ares,
>> + void *context)
>> +{
>> + struct acpi_resource_extended_irq *ext_irq;
>> + u32 *num_irqs = context;
>> +
>> + switch (ares->type) {
>> + case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
>> + ext_irq = &ares->data.extended_irq;
>> + *num_irqs += ext_irq->interrupt_count;
>> + break;
>> + default:
>> + break;
>> + }
>> +
>> + return AE_OK;
>> +}
>> +
>> +static int mbigen_acpi_create_domain(struct platform_device *pdev,
>> + struct mbigen_device *mgn_chip)
>> +{
>> + struct irq_domain *domain;
>> + u32 num_msis = 0;
>> + acpi_status status;
>> +
>> + status = acpi_walk_resources(ACPI_HANDLE(&pdev->dev), METHOD_NAME__CRS,
>> + mbigen_acpi_process_resource, &num_msis);
>> + if (ACPI_FAILURE(status) || num_msis == 0)
>> + return -EINVAL;
>> +
>> + domain = platform_msi_create_device_domain(&pdev->dev, num_msis,
>> + mbigen_write_msg,
>> + &mbigen_domain_ops,
>> + mgn_chip);
>> + if (!domain)
>> + return -ENOMEM;
>> +
>> + return 0;
>> +}
>> +#else
>> +static inline int mbigen_acpi_create_domain(struct platform_device *pdev,
>> + struct mbigen_device *mgn_chip)
>> +{
>> + return -ENODEV;
>> +}
>> +#endif
>> +
>> static int mbigen_device_probe(struct platform_device *pdev)
>> {
>> struct mbigen_device *mgn_chip;
>> @@ -289,9 +338,17 @@ static int mbigen_device_probe(struct platform_device *pdev)
>> if (IS_ERR(mgn_chip->base))
>> return PTR_ERR(mgn_chip->base);
>>
>> - err = mbigen_of_create_domain(pdev, mgn_chip);
>> - if (err)
>> + if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node)
>> + err = mbigen_of_create_domain(pdev, mgn_chip);
>> + else if (ACPI_COMPANION(&pdev->dev))
>> + err = mbigen_acpi_create_domain(pdev, mgn_chip);
>> + else
>> + err = -EINVAL;
>> +
>> + if (err) {
>> + dev_err(&pdev->dev, "Failed to create mbi-gen@%p irqdomain", mgn_chip->base);
>> return err;
>> + }
>>
>> platform_set_drvdata(pdev, mgn_chip);
>> return 0;
>> @@ -303,10 +360,17 @@ static int mbigen_device_probe(struct platform_device *pdev)
>> };
>> MODULE_DEVICE_TABLE(of, mbigen_of_match);
>>
>> +static const struct acpi_device_id mbigen_acpi_match[] = {
>> + { "HISI0152", 0 },
>> + {}
>> +};
>> +MODULE_DEVICE_TABLE(acpi, mbigen_acpi_match);
>> +
>> static struct platform_driver mbigen_platform_driver = {
>> .driver = {
>> .name = "Hisilicon MBIGEN-V2",
>> .of_match_table = mbigen_of_match,
>> + .acpi_match_table = ACPI_PTR(mbigen_acpi_match),
>> },
>> .probe = mbigen_device_probe,
>> };
>> --
>> 1.7.12.4
>>
> _______________________________________________
> linuxarm mailing list
> linuxarm@huawei.com
> http://rnd-openeuler.huawei.com/mailman/listinfo/linuxarm
>
> .
>


\
 
 \ /
  Last update: 2017-03-22 15:20    [W:0.147 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site