lkml.org 
[lkml]   [2017]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC][PATCH 2/2] cpufreq: schedutil: Force max frequency on busy CPUs
Date
From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The PELT metric used by the schedutil governor underestimates the
CPU utilization in some cases. The reason for that may be time spent
in interrupt handlers and similar which is not accounted for by PELT.

That can be easily demonstrated by running kernel compilation on
a Sandy Bridge Intel processor, running turbostat in parallel with
it and looking at the values written to the MSR_IA32_PERF_CTL
register. Namely, the expected result would be that when all CPUs
were 100% busy, all of them would be requested to run in the maximum
P-state, but observation shows that this clearly isn't the case.
The CPUs run in the maximum P-state for a while and then are
requested to run slower and go back to the maximum P-state after
a while again. That causes the actual frequency of the processor to
visibly oscillate below the sustainable maximum in a jittery fashion
which clearly is not desirable.

To work around this issue use the observation that, from the
schedutil governor's perspective, CPUs that are never idle should
always run at the maximum frequency and make that happen.

To that end, add a counter of idle calls to struct sugov_cpu and
modify cpuidle_idle_call() to increment that counter every time it
is about to put the given CPU into an idle state. Next, make the
schedutil governor look at that counter for the current CPU every
time before it is about to start heavy computations. If the counter
has not changed for over SUGOV_BUSY_THRESHOLD time (equal to 50 ms),
the CPU has not been idle for at least that long and the governor
will choose the maximum frequency for it without looking at the PELT
metric at all.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
include/linux/sched/cpufreq.h | 6 ++++++
kernel/sched/cpufreq_schedutil.c | 38 ++++++++++++++++++++++++++++++++++++--
kernel/sched/idle.c | 3 +++
3 files changed, 45 insertions(+), 2 deletions(-)

Index: linux-pm/kernel/sched/cpufreq_schedutil.c
===================================================================
--- linux-pm.orig/kernel/sched/cpufreq_schedutil.c
+++ linux-pm/kernel/sched/cpufreq_schedutil.c
@@ -20,6 +20,7 @@
#include "sched.h"

#define SUGOV_KTHREAD_PRIORITY 50
+#define SUGOV_BUSY_THRESHOLD (50 * NSEC_PER_MSEC)

struct sugov_tunables {
struct gov_attr_set attr_set;
@@ -55,6 +56,9 @@ struct sugov_cpu {

unsigned long iowait_boost;
unsigned long iowait_boost_max;
+ unsigned long idle_calls;
+ unsigned long saved_idle_calls;
+ u64 busy_start;
u64 last_update;

/* The fields below are only needed when sharing a policy. */
@@ -192,6 +196,34 @@ static void sugov_iowait_boost(struct su
sg_cpu->iowait_boost >>= 1;
}

+void cpufreq_schedutil_idle_call(void)
+{
+ struct sugov_cpu *sg_cpu = this_cpu_ptr(&sugov_cpu);
+
+ sg_cpu->idle_calls++;
+}
+
+static bool sugov_cpu_is_busy(struct sugov_cpu *sg_cpu)
+{
+ if (sg_cpu->idle_calls != sg_cpu->saved_idle_calls) {
+ sg_cpu->busy_start = 0;
+ return false;
+ }
+
+ if (!sg_cpu->busy_start) {
+ sg_cpu->busy_start = sg_cpu->last_update;
+ return false;
+ }
+
+ return sg_cpu->last_update - sg_cpu->busy_start > SUGOV_BUSY_THRESHOLD;
+}
+
+static void sugov_save_idle_calls(struct sugov_cpu *sg_cpu)
+{
+ if (!sg_cpu->busy_start)
+ sg_cpu->saved_idle_calls = sg_cpu->idle_calls;
+}
+
static void sugov_update_single(struct update_util_data *hook, u64 time,
unsigned int flags)
{
@@ -207,7 +239,7 @@ static void sugov_update_single(struct u
if (!sugov_should_update_freq(sg_policy, time))
return;

- if (flags & SCHED_CPUFREQ_RT_DL) {
+ if ((flags & SCHED_CPUFREQ_RT_DL) || sugov_cpu_is_busy(sg_cpu)) {
next_f = policy->cpuinfo.max_freq;
} else {
sugov_get_util(&util, &max);
@@ -215,6 +247,7 @@ static void sugov_update_single(struct u
next_f = get_next_freq(sg_policy, util, max);
}
sugov_update_commit(sg_policy, time, next_f);
+ sugov_save_idle_calls(sg_cpu);
}

static unsigned int sugov_next_freq_shared(struct sugov_cpu *sg_cpu)
@@ -278,12 +311,13 @@ static void sugov_update_shared(struct u
sg_cpu->last_update = time;

if (sugov_should_update_freq(sg_policy, time)) {
- if (flags & SCHED_CPUFREQ_RT_DL)
+ if ((flags & SCHED_CPUFREQ_RT_DL) || sugov_cpu_is_busy(sg_cpu))
next_f = sg_policy->policy->cpuinfo.max_freq;
else
next_f = sugov_next_freq_shared(sg_cpu);

sugov_update_commit(sg_policy, time, next_f);
+ sugov_save_idle_calls(sg_cpu);
}

raw_spin_unlock(&sg_policy->update_lock);
Index: linux-pm/kernel/sched/idle.c
===================================================================
--- linux-pm.orig/kernel/sched/idle.c
+++ linux-pm/kernel/sched/idle.c
@@ -151,6 +151,9 @@ static void cpuidle_idle_call(void)
*/
rcu_idle_enter();

+ /* Notify the schedutil cpufreq governor that we are entering idle. */
+ cpufreq_schedutil_idle_call();
+
if (cpuidle_not_available(drv, dev)) {
default_idle_call();
goto exit_idle;
Index: linux-pm/include/linux/sched/cpufreq.h
===================================================================
--- linux-pm.orig/include/linux/sched/cpufreq.h
+++ linux-pm/include/linux/sched/cpufreq.h
@@ -24,4 +24,10 @@ void cpufreq_add_update_util_hook(int cp
void cpufreq_remove_update_util_hook(int cpu);
#endif /* CONFIG_CPU_FREQ */

+#ifdef CONFIG_CPU_FREQ_GOV_SCHEDUTIL
+extern void cpufreq_schedutil_idle_call(void);
+#else
+static inline void cpufreq_schedutil_idle_call(void) {}
+#endif /* CONFIG_CPU_FREQ_GOV_SCHEDUTIL */
+
#endif /* _LINUX_SCHED_CPUFREQ_H */
\
 
 \ /
  Last update: 2017-03-19 14:41    [W:0.248 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site