lkml.org 
[lkml]   [2017]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/4] media: imx-csi: add frame size/interval enumeration
From
Date


On 03/19/2017 03:49 AM, Russell King wrote:
> Add frame size and frame interval enumeration to CSI.
>
> CSI can scale the image independently horizontally and vertically by a
> factor of two, which enumerates to four different frame sizes.
>
> CSI can also drop frames, resulting in frame rate reduction, so
> enumerate the resulting possible output frame rates.
>
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> ---
> drivers/staging/media/imx/imx-media-csi.c | 51 +++++++++++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
>
> diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
> index 65346e789dd6..d19659d7ddc2 100644
> --- a/drivers/staging/media/imx/imx-media-csi.c
> +++ b/drivers/staging/media/imx/imx-media-csi.c
> @@ -1073,6 +1073,55 @@ static int csi_enum_mbus_code(struct v4l2_subdev *sd,
> return ret;
> }
>
> +static int csi_enum_frame_size(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_frame_size_enum *fse)
> +{
> + struct csi_priv *priv = v4l2_get_subdevdata(sd);
> + struct v4l2_mbus_framefmt *fmt;
> + int ret = 0;
> +
> + if (fse->pad >= CSI_NUM_PADS ||
> + fse->index > (fse->pad == CSI_SINK_PAD ? 0 : 3))
> + return -EINVAL;
> +
> + mutex_lock(&priv->lock);
> + fmt = __csi_get_fmt(priv, cfg, fse->pad, fse->which);
> + fse->min_width = fse->max_width = fse->index & 1 ?
> + fmt->width >> 1 : fmt->width;
> + fse->min_height = fse->max_height = fse->index & 2 ?
> + fmt->height >> 1 : fmt->height;
> + mutex_unlock(&priv->lock);
> +
> + return ret;
> +}

This will only enumerate the currently set/tried format at the sink
pad. But the sink pad supports a range of widths/heights.

I think this function should call csi_try_fmt() at the sink pad.

The other media drivers do the same, they return a supported range at
the sinks rather than only the last set/tried values.

So the sink enumeration should return a continuous range.
The source enumeration should behave the same as you have it above
however, i.e. a discrete set of 4 possibilities since the CSI is limited to
only /2 downsizing in both dimensions.

Steve

> +
> +static int csi_enum_frame_interval(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_frame_interval_enum *fie)
> +{
> + struct csi_priv *priv = v4l2_get_subdevdata(sd);
> + struct v4l2_mbus_framefmt *fmt;
> + int ret = 0;
> +
> + if (fie->pad >= CSI_NUM_PADS ||
> + fie->index >= (fie->pad == CSI_SINK_PAD ? 1 : ARRAY_SIZE(csi_skip)))
> + return -EINVAL;
> +
> + mutex_lock(&priv->lock);
> + fmt = __csi_get_fmt(priv, cfg, fie->pad, fie->which);
> + if ((fie->width == fmt->width || fie->width == fmt->width / 2) &&
> + (fie->height == fmt->height || fie->height == fmt->height / 2)) {
> + fie->interval = priv->frame_interval;
> + csi_apply_skip_interval(&csi_skip[fie->index], &fie->interval);
> + } else {
> + ret = -EINVAL;
> + }
> + mutex_unlock(&priv->lock);
> +
> + return ret;
> +}
> +
> static int csi_get_fmt(struct v4l2_subdev *sd,
> struct v4l2_subdev_pad_config *cfg,
> struct v4l2_subdev_format *sdformat)
> @@ -1473,6 +1522,8 @@ static struct v4l2_subdev_video_ops csi_video_ops = {
>
> static struct v4l2_subdev_pad_ops csi_pad_ops = {
> .enum_mbus_code = csi_enum_mbus_code,
> + .enum_frame_size = csi_enum_frame_size,
> + .enum_frame_interval = csi_enum_frame_interval,
> .get_fmt = csi_get_fmt,
> .set_fmt = csi_set_fmt,
> .get_selection = csi_get_selection,

\
 
 \ /
  Last update: 2017-03-19 23:20    [W:0.253 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site