lkml.org 
[lkml]   [2017]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] gpio: omap: return error if requested debounce time is not possible
From
Date


On 03/17/2017 12:54 PM, David Rivshin wrote:
> Hi Grygorii,
>
> On Fri, 17 Mar 2017 11:45:56 -0500
> Grygorii Strashko <grygorii.strashko@ti.com> wrote:
>
>> On 03/16/2017 07:57 PM, David Rivshin wrote:
>>> From: David Rivshin <DRivshin@allworx.com>
>>>
>>> omap_gpio_debounce() does not validate that the requested debounce
>>> is within a range it can handle. Instead it lets the register value
>>> wrap silently, and always returns success.
>>>
>>> This can lead to all sorts of unexpected behavior, such as gpio_keys
>>> asking for a too-long debounce, but getting a very short debounce in
>>> practice.
>>>
>>> Fix this by returning -EINVAL if the requested value does not fit into
>>> the register field. If there is no debounce clock available at all,
>>> return -ENOTSUPP.
>>
>> In general this patch looks good, but there is one thing I'm worry about..
>>
>>>
>>> Fixes: e85ec6c3047b ("gpio: omap: fix omap2_set_gpio_debounce")
>>> Cc: <stable@vger.kernel.org> # 4.3+
>>> Signed-off-by: David Rivshin <drivshin@allworx.com>
>>> ---
>>> drivers/gpio/gpio-omap.c | 16 +++++++++++-----
>>> 1 file changed, 11 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
>>> index efc85a2..33ec02d 100644
>>> --- a/drivers/gpio/gpio-omap.c
>>> +++ b/drivers/gpio/gpio-omap.c
>>> @@ -208,8 +208,10 @@ static inline void omap_gpio_dbck_disable(struct gpio_bank *bank)
>>> * OMAP's debounce time is in 31us steps
>>> * <debounce time> = (GPIO_DEBOUNCINGTIME[7:0].DEBOUNCETIME + 1) x 31
>>> * so we need to convert and round up to the closest unit.
>>> + *
>>> + * Return: 0 on success, negative error otherwise.
>>> */
>>> -static void omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned offset,
>>> +static int omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned offset,
>>> unsigned debounce)
>>> {
>>> void __iomem *reg;
>>> @@ -218,11 +220,12 @@ static void omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned offset,
>>> bool enable = !!debounce;
>>>
>>> if (!bank->dbck_flag)
>>> - return;
>>> + return -ENOTSUPP;
>>>
>>> if (enable) {
>>> debounce = DIV_ROUND_UP(debounce, 31) - 1;
>>> - debounce &= OMAP4_GPIO_DEBOUNCINGTIME_MASK;
>>> + if ((debounce & OMAP4_GPIO_DEBOUNCINGTIME_MASK) != debounce)
>>> + return -EINVAL;
>>
>> This might cause boot issues as current drivers may expect this op to succeed even if
>> configured value is wrong - just think, may be we can do warn here and use max value as
>> fallback?
>
> I have not looked through all drivers to be sure, but at least the gpio-keys
> driver requires set_debounce to return an error if it can't satisfy the request.
> In that case gpio-keys will use a software timer instead.
>
> if (button->debounce_interval) {
> error = gpiod_set_debounce(bdata->gpiod,
> button->debounce_interval * 1000);
> /* use timer if gpiolib doesn't provide debounce */
> if (error < 0)
> bdata->software_debounce =
> button->debounce_interval;
> }
>
> Also, at least some other GPIO drivers (e.g. gpio-max7760) return -EINVAL in
> such a case. And gpiolib will return -ENOTSUPP if there is no debounce
> callback at all. So I expect all drivers which use gpiod_set_debounce() to
> handle error returns gracefully.
>
> So I certainly understand the concern about backwards compatibility, but I
> think clipping to max is the greater of the evils in this case. Even a
> warning may be too much, because it's not necessarily anything wrong.
> Perhaps an info or debug message would be helpful, though?
>
> If you prefer, I can try to go through all callers of gpiod_set_debounce()
> and see how they'd handle an error return. The handful I've looked through so
> far all behave like gpio-keys. The only ones I'd be particularly concerned
> about are platform-specific drivers which were perhaps never used with other
> gpio drivers. Do you know of that I should pay special attention to?

Yeh agree. But the problem here will be not only with drivers itself - it can be wrong data in DT :(
As result, even gpio-keys driver will just silently switch to software_debounce
without any notification.

But agree - max might not be a good choose, so can you add dev_err() below, pls.

>
>>
>>> }
>>>
>>> l = BIT(offset);
>>> @@ -255,6 +258,8 @@ static void omap2_set_gpio_debounce(struct gpio_bank *bank, unsigned offset,
>>> bank->context.debounce = debounce;
>>> bank->context.debounce_en = val;
>>> }
>>> +
>>> + return 0;
>>> }
>>>
>>> /**
>>> @@ -964,14 +969,15 @@ static int omap_gpio_debounce(struct gpio_chip *chip, unsigned offset,
>>> {
>>> struct gpio_bank *bank;
>>> unsigned long flags;
>>> + int ret;
>>>
>>> bank = gpiochip_get_data(chip);
>>>
>>> raw_spin_lock_irqsave(&bank->lock, flags);
>>> - omap2_set_gpio_debounce(bank, offset, debounce);
>>> + ret = omap2_set_gpio_debounce(bank, offset, debounce);
>>> raw_spin_unlock_irqrestore(&bank->lock, flags);

if (ret) dev_err();

>>>
>>> - return 0;
>>> + return ret;
>>> }
>>>
>>> static int omap_gpio_set_config(struct gpio_chip *chip, unsigned offset,
>>>
>>
>
>

--
regards,
-grygorii

\
 
 \ /
  Last update: 2017-03-17 19:56    [W:0.351 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site