lkml.org 
[lkml]   [2017]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/4] platform/x86: intel_pmc_ipc: Add pmc gcr read/write api's
On Thu, Mar 16, 2017 at 05:41:34PM -0700, Kuppuswamy Sathyanarayanan wrote:
> This patch adds API's to read/write PMC GC registers.
> PMC dependent devices like iTCO_WDT, Telemetry has requirement
> to acces GCR registers. These API's can be used for this
> purpose.
>
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
> ---
> arch/x86/include/asm/intel_pmc_ipc.h | 16 ++++++++++++++++
> drivers/platform/x86/intel_pmc_ipc.c | 14 ++++++++++++++
> 2 files changed, 30 insertions(+)
>
> diff --git a/arch/x86/include/asm/intel_pmc_ipc.h b/arch/x86/include/asm/intel_pmc_ipc.h
> index 4291b6a..017429d 100644
> --- a/arch/x86/include/asm/intel_pmc_ipc.h
> +++ b/arch/x86/include/asm/intel_pmc_ipc.h
> @@ -23,6 +23,10 @@
> #define IPC_ERR_EMSECURITY 6
> #define IPC_ERR_UNSIGNEDKERNEL 7
>
> +/* GCR reg offsets from gcr base*/
> +#define PMC_GCR_PRSTS_REG 0x00

remove.

> +#define PMC_GCR_PMC_CFG_REG 0x08
> +
> #if IS_ENABLED(CONFIG_INTEL_PMC_IPC)
>
> int intel_pmc_ipc_simple_command(int cmd, int sub);
> @@ -31,6 +35,8 @@ int intel_pmc_ipc_raw_cmd(u32 cmd, u32 sub, u8 *in, u32 inlen,
> int intel_pmc_ipc_command(u32 cmd, u32 sub, u8 *in, u32 inlen,
> u32 *out, u32 outlen);
> int intel_pmc_s0ix_counter_read(u64 *data);
> +u32 intel_pmc_gcr_read(u32 offset);

consider changing the signature to read data as out param and use return
value for better error handling since exported API can be called from
anywhere in the kernel.

> +void intel_pmc_gcr_write(u32 offset, u32 data);

ditto.

>
> #else
>
> @@ -56,6 +62,16 @@ static inline int intel_pmc_s0ix_counter_read(u64 *data)
> return -EINVAL;
> }
>
> +static inline u32 intel_pmc_gcr_read(u32 offset)
> +{
> + return -EINVAL;
> +}
> +

samew as above.

> +static inline void intel_pmc_gcr_write(u32 offset, u32 data)
> +{
> + return;
> +}
> +

ditto.

> #endif /*CONFIG_INTEL_PMC_IPC*/
>
> #endif
> diff --git a/drivers/platform/x86/intel_pmc_ipc.c b/drivers/platform/x86/intel_pmc_ipc.c
> index 0a33592..12018f3 100644
> --- a/drivers/platform/x86/intel_pmc_ipc.c
> +++ b/drivers/platform/x86/intel_pmc_ipc.c
> @@ -127,6 +127,7 @@ static struct intel_pmc_ipc_dev {
>
> /* gcr */
> resource_size_t gcr_base;
> + void __iomem *gcr_mem_base;
> int gcr_size;
> bool has_gcr_regs;
>
> @@ -199,6 +200,18 @@ static inline u64 gcr_data_readq(u32 offset)
> return readq(ipcdev.ipc_base + offset);
> }
>
> +u32 intel_pmc_gcr_read(u32 offset)
> +{
> + return readl(ipcdev.gcr_mem_base + offset);
> +}

what happens when this is called with a wrong offset on IPC enabled
platforms?

> +EXPORT_SYMBOL_GPL(intel_pmc_gcr_read);
> +
> +void intel_pmc_gcr_write(u32 offset, u32 data)
> +{
> + writel(data, ipcdev.gcr_mem_base + offset);
> +}

same as above.

> +EXPORT_SYMBOL_GPL(intel_pmc_gcr_write);
> +
> static int intel_pmc_ipc_check_status(void)
> {
> int status;
> @@ -747,6 +760,7 @@ static int ipc_plat_get_res(struct platform_device *pdev)
> ipcdev.ipc_base = addr;
>
> ipcdev.gcr_base = res->start + PLAT_RESOURCE_GCR_OFFSET;
> + ipcdev.gcr_mem_base = addr + PLAT_RESOURCE_GCR_OFFSET;
> ipcdev.gcr_size = PLAT_RESOURCE_GCR_SIZE;
> dev_info(&pdev->dev, "ipc res: %pR\n", res);
>
> --
> 2.7.4
>

--
Best Regards,
Rajneesh

\
 
 \ /
  Last update: 2017-03-17 12:27    [W:2.906 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site