lkml.org 
[lkml]   [2017]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 5/7] arm: dts: imx6q-icore: Add touchscreen node
On Wed, Mar 08, 2017 at 12:47:55PM +0530, Jagan Teki wrote:
> From: Jagan Teki <jagan@amarulasolutions.com>
>
> max11801 touchscreen on Engicam iCoreM6 Quad module is
> connected via i2c1, so add tc: max11801@48 on i2c1.
>
> Cc: Domenico Acri <domenico.acri@engicam.com>
> Cc: Matteo Lisi <matteo.lisi@engicam.com>
> Cc: Michael Trimarchi <michael@amarulasolutions.com>
> Cc: Shawn Guo <shawnguo@kernel.org>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v4:
> - Newly added patch.
>
> arch/arm/boot/dts/imx6q-icore.dts | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts
> index 73f34d1..8c1a572 100644
> --- a/arch/arm/boot/dts/imx6q-icore.dts
> +++ b/arch/arm/boot/dts/imx6q-icore.dts
> @@ -58,6 +58,15 @@
> status = "okay";
> };
>
> +&i2c1 {
> + ts: max11801@48 {
> + compatible = "max11801";

Undocumented compatible?

Shawn

> + reg = <0x48>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
> + };
> +};
> +
> &ldb {
> status = "okay";
>
> --
> 1.9.1
>

\
 
 \ /
  Last update: 2017-03-13 13:23    [W:0.066 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site