lkml.org 
[lkml]   [2017]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 0/4] usb: dwc3: dual-role support
From
Date
Felipe,

On 16/02/17 15:06, Roger Quadros wrote:
> Hi,
>
> We rely on the OTG controller block or Extcon to provide us with
> VBUS and ID line status via an interrupt.
>
> This is then used to switch the controller between host, peripheral
> and idle roles based on the following table.
>
> ID VBUS dual-role state
> -- ---- ---------------
> 0 x A_HOST - Host controller active
> 1 0 B_IDLE - Both Host and Gadget controllers inactive
> 1 1 B_PERIPHERAL - Gadget controller active
>
> Series depends on
> [1] dwc3 trivial fixes - https://lkml.org/lkml/2017/2/15/204

Would appreciate any feedback on this series. Thanks.

>
> Changelog:
> v2:
> - Use extcon device for VBUS/ID events if extcon phandle is present.
> - Fix bugs during system suspend/resume.
>
> cheers,
> -roger
>
> Roger Quadros (4):
> usb: dwc3: core.h: add some register definitions
> usb: dwc3: omap: don't miss events during suspend/resume
> usb: dwc3: add dual-role support
> usb: dwc3: Workaround for super-speed host on dra7 in dual-role mode
>
> Documentation/devicetree/bindings/usb/dwc3.txt | 2 +
> drivers/usb/dwc3/core.c | 752 ++++++++++++++++++++++++-
> drivers/usb/dwc3/core.h | 131 ++++-
> drivers/usb/dwc3/dwc3-omap.c | 16 +
> drivers/usb/dwc3/gadget.c | 18 +-
> 5 files changed, 895 insertions(+), 24 deletions(-)
>

--
cheers,
-roger

\
 
 \ /
  Last update: 2017-03-13 09:34    [W:0.118 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site