lkml.org 
[lkml]   [2017]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 4/7] net: stmmac: Parse FIFO sizes from feature registers
From
Date
Às 7:41 PM de 3/9/2017, Thierry Reding escreveu:
> On Thu, Mar 02, 2017 at 03:09:11PM +0000, Joao Pinto wrote:
>> Hi Thierry,
>>
>> Às 5:24 PM de 2/23/2017, Thierry Reding escreveu:
>>> From: Thierry Reding <treding@nvidia.com>
>>>
>>> New version of this core encode the FIFO sizes in one of the feature
>>> registers. Use these sizes as default, but still allow device tree to
>>> override them for backwards compatibility.
>>>
>>> Signed-off-by: Thierry Reding <treding@nvidia.com>
>>> ---
>>> drivers/net/ethernet/stmicro/stmmac/common.h | 3 +++
>>> drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 2 ++
>>> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 +++
>>> 3 files changed, 8 insertions(+)
>>>
>>> diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
>>> index 144fe84e8a53..6ac653845d82 100644
>>> --- a/drivers/net/ethernet/stmicro/stmmac/common.h
>>> +++ b/drivers/net/ethernet/stmicro/stmmac/common.h
>>> @@ -324,6 +324,9 @@ struct dma_features {
>>> unsigned int number_tx_queues;
>>> /* Alternate (enhanced) DESC mode */
>>> unsigned int enh_desc;
>>> + /* TX and RX FIFO sizes */
>>> + unsigned int tx_fifo_size;
>>> + unsigned int rx_fifo_size;
>>> };
>>>
>>> /* GMAC TX FIFO is 8K, Rx FIFO is 16K */
>>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
>>> index 377d1b44d4f2..8d249f3b34c8 100644
>>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
>>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
>>> @@ -296,6 +296,8 @@ static void dwmac4_get_hw_feature(void __iomem *ioaddr,
>>> hw_cap = readl(ioaddr + GMAC_HW_FEATURE1);
>>> dma_cap->av = (hw_cap & GMAC_HW_FEAT_AVSEL) >> 20;
>>> dma_cap->tsoen = (hw_cap & GMAC_HW_TSOEN) >> 18;
>>> + dma_cap->tx_fifo_size = 128 << ((hw_cap >> 6) & 0x1f);
>>> + dma_cap->rx_fifo_size = 128 << ((hw_cap >> 0) & 0x1f);
>>
>> I suggest you follow the way that has been done for other parameters:
>>
>> dma_cap->rx_fifo_size = (hw_cap & GMAC_HW_RXFIFOSIZE) >> 0; where
>> GMAC_HW_RXFIFOSIZE is GENMASK(4, 0)
>> dma_cap->tx_fifo_size = (hw_cap & GMAC_HW_TXFIFOSIZE) >> 6; where
>> GMAC_HW_TXFIFOSIZE is GENMASK(10, 6)
>
> Okay, can do.
>
>>> /* MAC HW feature2 */
>>> hw_cap = readl(ioaddr + GMAC_HW_FEATURE2);
>>> /* TX and RX number of channels */
>>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>>> index d7387919bdb6..291e34f0ca94 100644
>>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>>> @@ -1281,6 +1281,9 @@ static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
>>> {
>>> int rxfifosz = priv->plat->rx_fifo_size;
>>>
>>> + if (rxfifosz == 0)
>>> + rxfifosz = priv->dma_cap.rx_fifo_size;
>>> +
>>> if (priv->plat->force_thresh_dma_mode)
>>> priv->hw->dma->dma_mode(priv->ioaddr, tc, tc, rxfifosz);
>>> else if (priv->plat->force_sf_dma_mode || priv->plat->tx_coe) {
>>>
>>
>> In my current patch for adding support for MTL in stmmac, I also had this
>> approach (sizes comming from feature register and platform data) so nice to see
>> it here, because I will be able to reutilize it in my future versions.
>>
>> There is only a slight twist that we have to pay attention to it. The RX and TX
>> queue size configuration needs to be one the following values:
>>
>> FIFO_256 = 0x0,
>> FIFO_512 = 0x1,
>> FIFO_1k = 0x3,
>> FIFO_2k = 0x7,
>> FIFO_4k = 0xf,
>> FIFO_8k = 0x1f,
>> FIFO_16k = 0x3f,
>> FIFO_32k = 0x7f
>>
>> These are the values you get from the features register, but are these the
>> values that users will configure in "plat->rx_fifo_size"? From a quick grep you
>> can see that users use real units:
>>
>> arch/arm/boot/dts/socfpga.dtsi: rx-fifo-depth = <4096>;
>> arch/arm/boot/dts/socfpga.dtsi: rx-fifo-depth = <4096>;
>> arch/arm/boot/dts/socfpga_arria10.dtsi: rx-fifo-depth = <16384>;
>> arch/arm/boot/dts/socfpga_arria10.dtsi: rx-fifo-depth = <16384>;
>> arch/arm/boot/dts/socfpga_arria10.dtsi: rx-fifo-depth = <16384>;
>> arch/arm/boot/dts/lpc18xx.dtsi: rx-fifo-depth = <256>;
>> arch/nios2/boot/dts/3c120_devboard.dts: rx-fifo-depth = <8192>;
>> arch/nios2/boot/dts/10m50_devboard.dts: rx-fifo-depth = <8192>;
>>
>> So in order to have it configurable from platform and features register you need
>> to convert the features values to "real" units and then in the end when you
>> write to the DMA Op Mode you need to convert it back to the required values.
>
> That's what the "128 << " part in dwmac4_get_hw_feature() does. As far
> as I can tell, that's equivalent to dwmac4_get_real_fifo_sz() function
> from your patch, but it's more compact.

Ok, great, but I suggest you put the operation clearer then (a convert macro
maybe), because this way will be more obvious.

>
>> You can check my patch here that already has this done:
>> https://urldefense.proofpoint.com/v2/url?u=http-3A__patchwork.ozlabs.org_patch_728566_&d=DwIFaQ&c=DPL6_X_6JkXFx7AXWqB0tg&r=s2fO0hii0OGNOv9qQy_HRXy-xAJUD1NNoEcc3io_kx0&m=vfSNvldRkxJ8_e-lvP03KElsSdtNkACrt5RZt47TVZE&s=KByW4fH0QMLR16vmW6ekKqBC-cvqe0nBeOWpXB6uG_4&e=
>
> I see that there's a bit of overlap between that patch and this series.
> How do you want to handle this? Do you want me to rebase on top of your
> patch, or would you prefer this series to get merged first and rework
> your patch on top of it?

I suggest you go first, and then I will adapt my development since I still
submiting the multiple queues MAC related operations.

Thanks.

>
> Thanks,
> Thierry
>

\
 
 \ /
  Last update: 2017-03-10 11:33    [W:0.129 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site