lkml.org 
[lkml]   [2017]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.10 032/167] hwmon: (it87) Do not overwrite bit 2..6 of pwm control registers
Date
4.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>

commit 4c7b8ca1ae5ed9e27014732c8a918ba11a86cf09 upstream.

In IT8620E, after setting pwm control to manual, it was observed that
pwm values for fan 4..6 have reversed results (writing 0 results in fans
running at full speed, writing 255 results in fans turned off).

With the new PWM control, pwm polarity for pwm control 4..6 is specified
in its pwm control registers. Those registers are overwritten when setting
the pwm mode or the temperature mapping. Do not touch bit 2..6 of pwm
control registers on register writes to fix the problem.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/hwmon/it87.c | 37 ++++++++++++++++++++++++-------------
1 file changed, 24 insertions(+), 13 deletions(-)

--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -1300,25 +1300,35 @@ static ssize_t set_pwm_enable(struct dev
it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
data->fan_main_ctrl);
} else {
+ u8 ctrl;
+
/* No on/off mode, set maximum pwm value */
data->pwm_duty[nr] = pwm_to_reg(data, 0xff);
it87_write_value(data, IT87_REG_PWM_DUTY[nr],
data->pwm_duty[nr]);
/* and set manual mode */
- data->pwm_ctrl[nr] = has_newer_autopwm(data) ?
- data->pwm_temp_map[nr] :
- data->pwm_duty[nr];
- it87_write_value(data, IT87_REG_PWM[nr],
- data->pwm_ctrl[nr]);
+ if (has_newer_autopwm(data)) {
+ ctrl = (data->pwm_ctrl[nr] & 0x7c) |
+ data->pwm_temp_map[nr];
+ } else {
+ ctrl = data->pwm_duty[nr];
+ }
+ data->pwm_ctrl[nr] = ctrl;
+ it87_write_value(data, IT87_REG_PWM[nr], ctrl);
}
} else {
- if (val == 1) /* Manual mode */
- data->pwm_ctrl[nr] = has_newer_autopwm(data) ?
- data->pwm_temp_map[nr] :
- data->pwm_duty[nr];
- else /* Automatic mode */
- data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
- it87_write_value(data, IT87_REG_PWM[nr], data->pwm_ctrl[nr]);
+ u8 ctrl;
+
+ if (has_newer_autopwm(data)) {
+ ctrl = (data->pwm_ctrl[nr] & 0x7c) |
+ data->pwm_temp_map[nr];
+ if (val != 1)
+ ctrl |= 0x80;
+ } else {
+ ctrl = (val == 1 ? data->pwm_duty[nr] : 0x80);
+ }
+ data->pwm_ctrl[nr] = ctrl;
+ it87_write_value(data, IT87_REG_PWM[nr], ctrl);

if (data->type != it8603 && nr < 3) {
/* set SmartGuardian mode */
@@ -1462,7 +1472,8 @@ static ssize_t set_pwm_temp_map(struct d
* otherwise, just store it for later use.
*/
if (data->pwm_ctrl[nr] & 0x80) {
- data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
+ data->pwm_ctrl[nr] = (data->pwm_ctrl[nr] & 0xfc) |
+ data->pwm_temp_map[nr];
it87_write_value(data, IT87_REG_PWM[nr], data->pwm_ctrl[nr]);
}
mutex_unlock(&data->update_lock);

\
 
 \ /
  Last update: 2017-03-10 11:24    [W:0.433 / U:2.404 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site