lkml.org 
[lkml]   [2017]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] devicetree: Add video bus switch
On Thu, Feb 9, 2017 at 5:02 PM, Rob Herring <robh@kernel.org> wrote:
> On Wed, Feb 8, 2017 at 4:30 PM, Pavel Machek <pavel@ucw.cz> wrote:
>> On Wed 2017-02-08 15:36:09, Rob Herring wrote:
>>> On Fri, Feb 03, 2017 at 01:35:08PM +0100, Pavel Machek wrote:
>>> >
>>> > N900 contains front and back camera, with a switch between the
>>> > two. This adds support for the switch component, and it is now
>>> > possible to select between front and back cameras during runtime.
>>> >
>>> > This adds documentation for the devicetree binding.
>>> >
>>> > Signed-off-by: Sebastian Reichel <sre@kernel.org>
>>> > Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
>>> > Signed-off-by: Pavel Machek <pavel@ucw.cz>
>>> >
>>> >
>>> > diff --git a/Documentation/devicetree/bindings/media/video-bus-switch.txt b/Documentation/devicetree/bindings/media/video-bus-switch.txt
>>> > new file mode 100644
>>> > index 0000000..1b9f8e0
>>> > --- /dev/null
>>> > +++ b/Documentation/devicetree/bindings/media/video-bus-switch.txt
>>> > @@ -0,0 +1,63 @@
>>> > +Video Bus Switch Binding
>>> > +========================
>>>
>>> I'd call it a mux rather than switch.
>>
>> It is a switch, not a multiplexor (
>> https://en.wikipedia.org/wiki/Multiplexing ). Only one camera can
>> operate at a time.
>
> It's no different than an i2c mux. It's one at a time.
>
>>
>>> BTW, there's a new mux-controller binding under review you might look
>>> at. It would only be needed here if the mux ctrl also controls other
>>> things.
>>
>> Do you have a pointer?
>
> Let me Google that for you:

https://lwn.net/Articles/713971/

>
>>
>>> > +Required Port nodes
>>> > +===================
>>> > +
>>> > +More documentation on these bindings is available in
>>> > +video-interfaces.txt in the same directory.
>>> > +
>>> > +reg : The interface:
>>> > + 0 - port for image signal processor
>>> > + 1 - port for first camera sensor
>>> > + 2 - port for second camera sensor
>>>
>>> This could be used for display side as well. So describe these just as
>>> inputs and outputs.
>>
>> I'd prefer not to confuse people. I guess that would be 0 -- output
>> port, 1, 2 -- input ports... But this is media data, are you sure it
>> is good idea to change this?
>
> And I'd prefer something that can be reused by others.
>
>>
>> Pavel
>> --
>> (english) http://www.livejournal.com/~pavelmachek
>> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

\
 
 \ /
  Last update: 2017-02-10 00:16    [W:0.801 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site