lkml.org 
[lkml]   [2017]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH next 0/2] crypto: atmel-sha: fix error management
Date
Hi all,

this series is based on next-20170209.

The first patch fixes a bug reported by Dan Carpenter. I didn't put a
Fixes tag since the buggy patch is only in linux-next for now so its
commit ID is likely to change when entering Linus' tree.
It fixes a wrong 'sed' command: many "return -EINVAL;" lines should have
been replaced by "return atmel_sha_complete(dd, -EINVAL);" but instead
were replaced by direct calls of "atmel_sha_complete(dd, -EINVAL);".
My bad, sorry for that!

The second patch fixes the way error cases are handled from
atmel_sha_start(). For instance, when atmel_sha_update_req() returned an
error, atmel_sha_final_req() may have been called after anyway. This issue
was present even before my rework of the request queue management, which
introduced atmel_sha_start(), so I guess this is a long time issue.

Finally, for driver maintainance purpose, I'm preparing other patches to
fix the very same and very unlikely issue in both atmel-aes.c and
atmel-sha.c:

atmel_{aes|sha}_hw_init() may fail, for instance if clk_enable() fails.
If so, atmel_{aes|sha}_complete() is called to release the hardware and
report the error. Indeed this _complete() function should be called to
report and handle any error. However it also incondionnally calls
clk_disable(). Hence the following sequence may be buggy:

err = atmel_{aes|sha}_hw_init(dd); /* clk_enable() may have failed. */
if (err)
return atmel_{aes|sha}_hw_init(dd, err);
/* clk_disable() is called anyway. */

I didn't finalize my fixes yet for this unlikely bug. Besides the bug was
already present in v4.9 and before, so before introducing
atmel_sha_complete().

from atmel_sha_handle_queue(), the older sequence was:

err = atmel_sha_hw_init(dd);

if (err)
goto err1;

[...]

err1:
if (err != -EINPROGRESS)
/* done_task will not finish it, so do it here */
atmel_sha_finish_req(req, err);

Best regards,

Cyrille

Cyrille Pitchen (2):
crypto: atmel-sha: fix missing "return" instructions
crypto: atmel-sha: fix error management in atmel_sha_start()

drivers/crypto/atmel-sha.c | 37 +++++++++++++++++++++++++++----------
1 file changed, 27 insertions(+), 10 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2017-02-09 17:53    [W:0.082 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site