lkml.org 
[lkml]   [2017]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 00/10] fujitsu-laptop: renames and cleanups
> Hi Michael
>
> Thanks very much for the work you've put in to clean up these patches. I
> very much appreciate it. I will go through them myself in the next day or
> so, and most importantly test them on my hardware to confirm there are no
> regressions.

Thanks! I did my best to keep track of everything, but something surely
could have slipped through, given the number of changes Alan's patches
introduce.

> Some initial comments follow.
>
> On Wed, Feb 08, 2017 at 02:46:23PM +0100, Micha?? K??pie?? wrote:
> > Some of these patches raise checkpatch warnings. This is intentional,
> > in order to make renames clean and easy to review.
>
> For what it's worth, I was also planning to go through and fix the
> checkpatch warnings in this driver, but held off until the issues raised by
> Alan's patches were addressed (essentially to make it easier to apply those
> old patches. If you are planning on doing this then I won't start it. :-)

I have a few draft patch series prepared that contain "real" cleanups
and incidentally also lower the total count of checkpatch issues in the
driver from ~70 to ~20 (ballpark figures). I think it is way better to
fix as many checkpatch issues as possible while also fixing actual code
and then iron out the leftovers than to first generate a lot of churn
which fixes spaces and newlines and then fix the code anyway. So yeah,
I would hold off pure checkpatch fixes until the more pressing matters
get sorted out.

>
> On to the ommitted changes from Alan's orginal patch series.
>
> > - Restructure fujitsu_init(). Quite frankly, I am pretty sure Alan
> > did not test his series on Fujitsu hardware with a logo lamp and/or
> > keyboard lamps.
>
> Back in 2009 I don't think there were many models with these features. This
> observation is therefore quite possible. I'm more than happy to leave
> fujitsu_init()'s structure as is, especially given that related issues will
> be addressed in your furture patch series.

Yes, they will. How these fixes will exactly look depends on the
feedback I get from Darren and Andy.

>
> > - Bail out when FUJ02B1 is not present. It could have been deemed
> > correct back in the day, but we now know that Fujitsu started
> > shipping devices without that ACPI device present, though with
> > FUJ02E3 still in place. These two ACPI devices are independent and
> > thus should not rely on each other's presence.
>
> Agreed. You are right, in 2009 I think it seemed like a good idea but it's
> clearly no longer valid.
>
> > - Move keycode[1-5] fields to struct fujitsu_laptop. Doing this
> > causes ordering issues inside fujitsu_init(), while a patch series I
> > have queued that makes fujitsu-laptop use a sparse keymap removes
> > these fields altogether.
>
> This makes sense.
>
> > - Allocate and free fujitsu_bl and fujitsu_laptop inside ACPI
> > callbacks. While elegant and correct, this also causes ordering
> > issues inside fujitsu_init() and can only be done once platform
> > device registration is properly fixed.
>
> Agreed.
>
> > - Sync backlight power status in acpi_fujitsu_bl_add(). The long-term
> > objective for fujitsu-laptop should be to achieve a clean split
> > between the backlight-related part and the laptop-related part.
> > This change keeps both parts intertwined. My fujitsu_init() cleanup
> > series contains a similar fix, but I have since found a different
> > solution to this problem which I will post once Alan's rebased
> > series gets applied.
>
> I'm happy to wait to see this alternative solution. In the meantime,
> keeping the two parts independent is a good idea.
>
> > - Remove dmi_check_cb_common(). The sparse keymap series I have
> > queued gets rid of this function without introducing an additional
> > field inside struct fujitsu_laptop.
>
> Ok.
>
> > Moreover, some other minor changes present in original patch 1/4 were
> > left out. A brief discussion of each such case follows.
> >
> > -#define ACPI_FUJITSU_BL_NOTIFY_CODE1 0x80
> > +#define ACPI_FUJITSU_NOTIFY_CODE1 0x80
> >
> > Notify code 0x80 is used by both parts of the driver (the
> > brightness-related one and the laptop-related one) and thus it should
> > not be annotated using the "_BL" infix specific to brightness-related
> > code.
>
> Agreed. Perhaps back in the day it was thought that it did only apply to
> the backlight but with the benefit of hindsight this is clearly not the
> case.
>
> > -#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
> > ...
> > -#endif
> >
> > This does not really bring any benefit while breaking consistency with
> > other parts of the driver.
>
> Fair enough.
>
> >
> > - dmi_check_system(fujitsu_laptop_dmi_table);
> > + dmi_check_system(fujitsu_dmi_table);
> >
> > The original patches moved this dmi_check_system() call to
> > acpi_fujitsu_laptop_add(), which justifies renaming fujitsu_dmi_table to
> > fujitsu_laptop_dmi_table. However, for reasons discussed above, the
> > rebased patches leave the dmi_check_system() call inside fujitsu_init(),
> > thus making the rename dubious.
>
> Agreed. In light of the reasons given this makes no sense.
>
> > - DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
> > + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU_LAPTOP SIEMENS"),
> >
> > There are multiple changes like this in original patch 1/4. They are
> > obviously wrong and were probably introduced by an unreviewed automatic
> > replacement.
>
> I noticed this myself; they are clearly incorrect and have the hallmarks of
> a global search/replace operation. They were omitted in the initial RFC
> series I sent through for this reason.
>
> [Blank line removal]
> > There are four instances of such a removal in original patch 1/4. They
> > are obviously correct, though they all happen inside functions related
> > to platform device attributes which I hope will soon get removed
> > altogether. Thus I refrained from applying these to reduce churn (at
> > least a bit).
>
> I'm happy with that. The future checkpatch cleanup series could address
> these if they are deemed important enough.

Yes, I have this specific cleanup queued in a branch containing
miscellaneous fixes anyway, so it should not get lost in the noise.

>
> > Finally, some of the changes suggested by Alan were already applied
> > along the way:
> >
> > - kmalloc() + memset() occurences were changed to kzalloc() by commit
> > 6c75dd0f965b ("drivers/platform/x86: Use kzalloc").
> >
> > - Unused debug macros were removed by commit 00816e1b3839
> > ("fujitsu-laptop: Remove unused macros").
>
> The entire debug structure has been revised since Alan's original patch was
> made, making most if not all of the debug changes unnecessary.
>
> My ack will follow once I've tested this series on my hardware. I will try
> to get to this in the next 24 hours.

Great, thanks!

--
Best regards,
Michał Kępień

\
 
 \ /
  Last update: 2017-02-09 08:31    [W:0.184 / U:0.748 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site