Messages in this thread | | | Date | Wed, 8 Feb 2017 15:50:14 -0600 | From | Rob Herring <> | Subject | Re: [PATCH v2 6/6] watchdog: ts4600: add driver for TS-4600 watchdog |
| |
On Fri, Feb 03, 2017 at 02:47:29PM -0500, Sebastien Bourdelin wrote: > This watchdog is instantiated in a FPGA and can only be access using a > GPIOs bit-banged bus, called the NBUS by Technologic Systems. > The watchdog is made of only one register, called the feed register. > Writing to this register will re-arm the watchdog for a given time (and > enable it if it was disable). It can be disabled by writing a special > value into it. > > --- > Changes v1 -> v2: > - rebase on master > - retrieve the ts_nbus instantiated by the parent node (suggested by > Linus Walleij) > - rename the wdt by watchdog in the device tree and in the > documentation (suggested by Rob Herring) > - add a dependency to the TS_NBUS driver in the Kconfig (suggested by > Guenter Roeck) > - simplify the set_timeout function (suggested by Guenter Roeck) > - use the max_hw_heartbeat_ms callback instead of the max_timeout > callback (suggested by Guenter Roeck) > > Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> > --- > .../devicetree/bindings/watchdog/ts4600-wdt.txt | 16 ++ > arch/arm/boot/dts/imx28-ts4600-common.dtsi | 5 +
Acked-by: Rob Herring <robh@kernel.org>
> drivers/watchdog/Kconfig | 11 ++ > drivers/watchdog/Makefile | 1 + > drivers/watchdog/ts4600_wdt.c | 217 +++++++++++++++++++++ > 5 files changed, 250 insertions(+) > create mode 100644 Documentation/devicetree/bindings/watchdog/ts4600-wdt.txt > create mode 100644 drivers/watchdog/ts4600_wdt.c
| |