lkml.org 
[lkml]   [2017]   [Feb]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/1] xhci: add USB2 test mode support
Date
On Wednesday 08 February 2017 13:53:30, Greg Kroah-Hartman wrote:
> On Wed, Feb 08, 2017 at 11:26:35AM +0100, Alexander Stein wrote:
> > This patch adds support for USB2 test mode (Test_J, Test_K,
> > Test_SE0_NAK and Test_Packet) per XHCI spec 4.19.6.
>
> What does that mean "in English"? In other words, why do we want this?
> What does it provide for a user? Why do we care?

USB2 test mode is a required hardware feature for system integrators
validating their hardware according to USB spec, regarding signal strength and
stuff. It is purely a hardware test feature.

> > @@ -1134,6 +1137,64 @@ int xhci_hub_control(struct usb_hcd *hcd, u16
> > typeReq, u16 wValue,>
> > temp |= PORT_U2_TIMEOUT(timeout);
> > writel(temp, port_array[wIndex] + PORTPMSC);
> > break;
> >
> > + case USB_PORT_FEAT_TEST:
> > + /* 4.19.6 Port Test Modes (USB2 Test Mode) */
> > + if (hcd->speed != HCD_USB2)
> > + goto error;
> > +
> > + /* FIXME: Test_Force_Enable case to be implemented */
> > + if (selector < TEST_J || selector > TEST_PACKET)
> > + goto error;
> > +
> > + /* Disable all Device Slots */
> > + for (i = 0; i < MAX_HC_SLOTS; i++) {
> > + struct xhci_command *command;
> > +
> > + if (!xhci->dcbaa->dev_context_ptrs[i])
> > + continue;
> > + command = xhci_alloc_command(xhci, false,
> > + false, GFP_ATOMIC);
> > + if (!command)
> > + return -ENOMEM;
> > + if (xhci_queue_slot_control(xhci, command,
> > + TRB_DISABLE_SLOT, i)) {
> > + xhci_err(xhci,
> > + "Disable slot[%d] fail!\n", i);
> > + goto error;
> > + }
> > + xhci_dbg(xhci, "Disable Slot[%d].\n", i);
> > + }
> > +
> > + /* Put all ports to the Disable state by clear PP */
> > + xhci_dbg(xhci, "Disable all port (PP = 0)\n");
> > + for (i = 0; i < max_ports; i++) {
> > + temp = readl(port_array[i]);
> > + temp &= ~PORT_POWER;
> > + writel(temp, port_array[i]);
> > + }
> > +
> > + /* Stop the controller */
> > + xhci_dbg(xhci, "Stop controller\n");
> > + temp = readl(&xhci->op_regs->command);
> > + temp &= ~CMD_RUN;
> > + writel(temp, &xhci->op_regs->command);
> > +
> > + if (xhci_handshake(&xhci->op_regs->status,
> > + STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC)) {
> > + xhci_warn(xhci, "Stop controller timeout\n");
> > + return -ETIMEDOUT;
> > + }
> > +
> > + /* Disable runtime PM for test mode */
> > + pm_runtime_forbid(hcd->self.controller);
> > +
> > + /* Set PORTPMSC.PTC field for selected test mode */
> > + xhci_dbg(xhci, "Enter Test Mode: %d\n", selector);
> > + temp = readl(port_array[wIndex] + PORTPMSC);
> > + temp |= selector << 28;
> > + writel(temp, port_array[wIndex] + PORTPMSC);
> > +
> > + break;
>
> What does this "test mode" do? Where does it report the information?
> Who can use it?

Useually you need an oscilloscope and have to enable those test modes on the
hardware. This will send some specific test patterns on D+/D-. There is no
report available (in linux itself) as it is purely externaly visible.
Regular USB usage is not possible at that time.
Anyone (well access to e.g. /dev/bus/usb/001/001 provided) can use it by
sending appropriate USB_PORT_FEAT_TEST requests to the hub.
The same feature for ehci based hosts is already available at
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/drivers/usb/host/ehci-hub.c#n1267

Best regards,
Alexander
--
Dipl.-Inf. Alexander Stein
SYS TEC electronic GmbH
alexander.stein@systec-electronic.com

Legal and Commercial Address:
Am Windrad 2
08468 Heinsdorfergrund
Germany

Office: +49 (0) 3765 38600-0
Fax: +49 (0) 3765 38600-4100

Managing Directors:
Director Technology/CEO: Dipl.-Phys. Siegmar Schmidt;
Director Commercial Affairs/COO: Dipl. Ing. (FH) Armin von Collrepp
Commercial Registry:
Amtsgericht Chemnitz, HRB 28082; USt.-Id Nr. DE150534010

\
 
 \ /
  Last update: 2017-02-08 14:13    [W:0.141 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site