lkml.org 
[lkml]   [2017]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/6] ARM: dts: armada-xp-98dx3236: combine dfx server nodes
Date
Rather than having a separate node for the dfx server add a reg property
to the parent node. This give somes compatibility with the Marvell
supplied SDK.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
Changes in v2:
- none

Documentation/devicetree/bindings/net/marvell,prestera.txt | 13 +++++--------
arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 8 ++------
2 files changed, 7 insertions(+), 14 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt
index 5fbab29718e8..c329608fa887 100644
--- a/Documentation/devicetree/bindings/net/marvell,prestera.txt
+++ b/Documentation/devicetree/bindings/net/marvell,prestera.txt
@@ -32,19 +32,16 @@ DFX Server bindings
-------------------

Required properties:
-- compatible: must be "marvell,dfx-server"
+- compatible: must be "marvell,dfx-server", "simple-bus"
+- ranges: describes the address mapping of a memory-mapped bus.
- reg: address and length of the register set for the device.

Example:

-dfx-registers {
- compatible = "simple-bus";
+dfx-server {
+ compatible = "marvell,dfx-server", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
-
- dfx: dfx@0 {
- compatible = "marvell,dfx-server";
- reg = <0 0x100000>;
- };
+ reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
};
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index f6a03dcee5ef..bd8261fdec81 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -195,11 +195,12 @@
};
};

- dfxr: dfx-registers@ac000000 {
+ dfx: dfx-server@ac000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
+ reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;

dfx_coredivclk: corediv-clock@f8268 {
compatible = "marvell,mv98dx3236-corediv-clock";
@@ -208,11 +209,6 @@
clocks = <&mainpll>;
clock-output-names = "nand";
};
-
- dfx: dfx@0 {
- compatible = "marvell,dfx-server";
- reg = <0 0x100000>;
- };
};

switch: switch@a8000000 {
--
2.11.0.24.ge6920cf
\
 
 \ /
  Last update: 2017-02-07 21:29    [W:0.077 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site