lkml.org 
[lkml]   [2017]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 03/10] media: dt-bindings: vpif: extend the example with an output port
    Date
    This makes the example more or less correspond with the da850-evm
    hardware setup.

    Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
    ---
    .../devicetree/bindings/media/ti,da850-vpif.txt | 35 ++++++++++++++++++----
    1 file changed, 29 insertions(+), 6 deletions(-)

    diff --git a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
    index 9c7510b..543f6f3 100644
    --- a/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
    +++ b/Documentation/devicetree/bindings/media/ti,da850-vpif.txt
    @@ -28,19 +28,27 @@ I2C-connected TVP5147 decoder:
    reg = <0x217000 0x1000>;
    interrupts = <92>;

    - port {
    - vpif_ch0: endpoint@0 {
    + port@0 {
    + vpif_input_ch0: endpoint@0 {
    reg = <0>;
    bus-width = <8>;
    - remote-endpoint = <&composite>;
    + remote-endpoint = <&composite_in>;
    };

    - vpif_ch1: endpoint@1 {
    + vpif_input_ch1: endpoint@1 {
    reg = <1>;
    bus-width = <8>;
    data-shift = <8>;
    };
    };
    +
    + port@1 {
    + vpif_output_ch0: endpoint@0 {
    + reg = <0>;
    + bus-width = <8>;
    + remote-endpoint = <&composite_out>;
    + };
    + };
    };

    [ ... ]
    @@ -53,13 +61,28 @@ I2C-connected TVP5147 decoder:
    status = "okay";

    port {
    - composite: endpoint {
    + composite_in: endpoint {
    hsync-active = <1>;
    vsync-active = <1>;
    pclk-sample = <0>;

    /* VPIF channel 0 (lower 8-bits) */
    - remote-endpoint = <&vpif_ch0>;
    + remote-endpoint = <&vpif_input_ch0>;
    + bus-width = <8>;
    + };
    + };
    + };
    +
    + adv7343@2a {
    + compatible = "adi,adv7343";
    + reg = <0x2a>;
    +
    + port {
    + composite_out: endpoint {
    + adi,dac-enable = <1 1 1>;
    + adi,sd-dac-enable = <1>;
    +
    + remote-endpoint = <&vpif_output_ch0>;
    bus-width = <8>;
    };
    };
    --
    2.9.3
    \
     
     \ /
      Last update: 2017-02-07 17:46    [W:5.909 / U:25.100 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site