lkml.org 
[lkml]   [2017]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/3] dt: ASoC: zx-i2s: Document for the ZTE zx296718 I2S controller
Date
This patch documents the devicetree for the ZTE's zx296718
I2S audio controller.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
---
Documentation/devicetree/bindings/sound/zte,zx-i2s.txt | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
index 7e5aa6f..c405561 100644
--- a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
@@ -1,10 +1,12 @@
ZTE ZX296702 I2S controller

Required properties:
- - compatible : Must be "zte,zx296702-i2s"
+ - compatible : Should include one of the following strings:
+ "zte,zx296702-i2s","zte,zx296718-i2s".
- reg : Must contain I2S core's registers location and length
- clocks : Pairs of phandle and specifier referencing the controller's clocks.
- - clock-names: "tx" for the clock to the I2S interface.
+ - clock-names: "tx" for the wclk, "pclk" for the pclk to the I2S interface.
+ must contain pclk for zx296718 SoC.
- dmas: Pairs of phandle and specifier for the DMA channel that is used by
the core. The core expects two dma channels for transmit.
- dma-names : Must be "tx" and "rx"
--
2.7.4
\
 
 \ /
  Last update: 2017-02-07 04:04    [W:0.055 / U:0.812 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site