Messages in this thread Patch in this message | | | From | Gerd Hoffmann <> | Subject | [PATCH v2 8/8] ARM: dts: bcm2837: add &sdhci and &sdhost | Date | Fri, 3 Feb 2017 13:11:53 +0100 |
| |
For the raspberry pi 3 we'll need both sdhci (handles sdio wifi) and sdhost (handles sdcard).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> --- arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts index c309633..972f14d 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts @@ -22,3 +22,20 @@ &uart1 { status = "okay"; }; + +/* SDHCI is used to control the SDIO for wireless */ +&sdhci { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio34>; + status = "okay"; + bus-width = <4>; + non-removable; +}; + +/* SDHOST is used to drive the SD card */ +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + status = "okay"; + bus-width = <4>; +}; -- 1.8.3.1
| |