lkml.org 
[lkml]   [2017]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 6/6] ARM: davinci: add pdata-quirks for da850-evm vpif display
Date
Similarly to vpif capture: we need to register the vpif display driver
and the corresponding adv7343 encoder in pdata-quirks as the DT
support is not complete - there isn't currently a way to define the
output_routing in the V4L2 drivers (c.f. s_routing) via DT.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/mach-davinci/pdata-quirks.c | 66 ++++++++++++++++++++++++++++++++++++
1 file changed, 66 insertions(+)

diff --git a/arch/arm/mach-davinci/pdata-quirks.c b/arch/arm/mach-davinci/pdata-quirks.c
index 4a9603d..329f540 100644
--- a/arch/arm/mach-davinci/pdata-quirks.c
+++ b/arch/arm/mach-davinci/pdata-quirks.c
@@ -11,6 +11,7 @@
#include <linux/of_platform.h>

#include <media/i2c/tvp514x.h>
+#include <media/i2c/adv7343.h>

#include <mach/common.h>
#include <mach/da8xx.h>
@@ -126,6 +127,70 @@ static void __init da850_vpif_capture_legacy_init_evm(void)
da850_vpif_legacy_register_capture();
}

+static struct adv7343_platform_data adv7343_pdata = {
+ .mode_config = {
+ .dac = { 1, 1, 1 },
+ },
+ .sd_config = {
+ .sd_dac_out = { 1 },
+ },
+};
+
+static struct vpif_subdev_info da850_vpif_subdev[] = {
+ {
+ .name = "adv7343",
+ .board_info = {
+ I2C_BOARD_INFO("adv7343", 0x2a),
+ .platform_data = &adv7343_pdata,
+ },
+ },
+};
+
+static const struct vpif_output da850_ch0_outputs[] = {
+ {
+ .output = {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .capabilities = V4L2_OUT_CAP_STD,
+ .std = V4L2_STD_ALL,
+ },
+ .subdev_name = "adv7343",
+ .output_route = ADV7343_COMPOSITE_ID,
+ },
+ {
+ .output = {
+ .index = 1,
+ .name = "S-Video",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .capabilities = V4L2_OUT_CAP_STD,
+ .std = V4L2_STD_ALL,
+ },
+ .subdev_name = "adv7343",
+ .output_route = ADV7343_SVIDEO_ID,
+ },
+};
+
+static struct vpif_display_config da850_vpif_display_config = {
+ .subdevinfo = da850_vpif_subdev,
+ .subdev_count = ARRAY_SIZE(da850_vpif_subdev),
+ .chan_config[0] = {
+ .outputs = da850_ch0_outputs,
+ .output_count = ARRAY_SIZE(da850_ch0_outputs),
+ },
+ .card_name = "DA850/OMAP-L138 Video Display",
+};
+
+static void __init da850_vpif_display_legacy_init_evm(void)
+{
+ int ret;
+
+ ret = da850_register_vpif_display(&da850_vpif_display_config);
+ if (ret)
+ pr_warn("%s: VPIF display setup failed: %d\n",
+ __func__, ret);
+}
+
static void pdata_quirks_check(struct pdata_init *quirks)
{
while (quirks->compatible) {
@@ -139,6 +204,7 @@ static void pdata_quirks_check(struct pdata_init *quirks)

static struct pdata_init pdata_quirks[] __initdata = {
{ "ti,da850-lcdk", da850_vpif_capture_legacy_init_lcdk, },
+ { "ti,da850-evm", da850_vpif_display_legacy_init_evm, },
{ "ti,da850-evm", da850_vpif_capture_legacy_init_evm, },
{ /* sentinel */ },
};
--
2.9.3
\
 
 \ /
  Last update: 2017-02-28 17:37    [W:0.082 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site