lkml.org 
[lkml]   [2017]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/3] coresight: bindings for debug module
Date
According to ARMv8 architecture reference manual (ARM DDI 0487A.k)
Chapter 'Part H: External debug', the CPU can integrate debug module
and it can support self-hosted debug and external debug. Especially
for supporting self-hosted debug, this means the program can access
the debug module from mmio region; and usually the mmio region is
integrated with coresight.

So add document for binding debug component, includes binding to APB
clock; and also need specify the CPU node which the debug module is
dedicated to specific CPU.

Suggested-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
.../devicetree/bindings/arm/coresight-debug.txt | 40 ++++++++++++++++++++++
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/coresight-debug.txt

diff --git a/Documentation/devicetree/bindings/arm/coresight-debug.txt b/Documentation/devicetree/bindings/arm/coresight-debug.txt
new file mode 100644
index 0000000..89820d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/coresight-debug.txt
@@ -0,0 +1,40 @@
+* CoreSight Debug Component:
+
+CoreSight debug component are compliant with the ARMv8 architecture reference
+manual (ARM DDI 0487A.k) Chapter 'Part H: External debug'. The external debug
+module is mainly used for two modes: self-hosted debug and external debug, and
+it can be accessed from mmio region from Coresight and eventually the debug
+module connects with CPU for debugging. And the debug module provides
+sample-based profiling extension, which can be used to sample CPU program
+counter, secure state and exception level, etc; usually every CPU has one
+dedicated debug module to be connected.
+
+Required properties:
+
+- compatible : should be
+ * "arm,coresight-debug", "arm,primecell"; supplemented with
+ "arm,primecell" as driver is using the AMBA bus interface.
+
+- reg : physical base address and length of the register set.
+
+- clocks : the clock associated to this component.
+
+- clock-names : the name of the clock referenced by the code. Since we are
+ using the AMBA framework, the name of the clock providing
+ the interconnect should be "apb_pclk" and the clock is
+ mandatory. The interface between the debug logic and the
+ processor core is clocked by the internal CPU clock, so it
+ is enabled with CPU clock by default.
+
+- cpu : the cpu phandle the debug module is affined to. When omitted
+ the source is considered to belong to CPU0.
+
+Example:
+
+ debug@f6590000 {
+ compatible = "arm,coresight-debug","arm,primecell";
+ reg = <0 0xf6590000 0 0x1000>;
+ clocks = <&sys_ctrl HI6220_DAPB_CLK>;
+ clock-names = "apb_pclk";
+ cpu = <&cpu0>;
+ };
--
2.7.4
\
 
 \ /
  Last update: 2017-02-28 16:18    [W:1.473 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site