lkml.org 
[lkml]   [2017]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Subject[GIT PULL] first round of SCSI updates for the 4.10+ merge window
From
Date
This update includes the usual round of major driver updates (ncr5380,
ufs, lpfc, be2iscsi, hisi_sas, storvsc, cxlflash, aacraid,
megaraid_sas, ). There's also an assortment of minor fixes and the
major update of switching another bunch of drivers to
pci_alloc_irq_vectors from Christoph.

The patch is available here:

git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc

The short changelog is:

Arnd Bergmann (2):
scsi: megaraid_sas: handle dma_addr_t right on 32-bit
scsi: aacraid: avoid open-coded upper_32_bits

Cao jin (1):
scsi: qla4xxx: comments correction

Chaitra P B (4):
scsi: mpt3sas: Updating driver version to v15.100.00.00
scsi: mpt3sas: Fix Firmware fault state 0x2100 during heavy 4K RR FIO stress test.
scsi: mpt3sas: Fix for Crusader to achieve product targets with SAS devices.
scsi: mpt3sas: Added print to notify cable running at a degraded speed.

Christoph Hellwig (11):
scsi: snic: switch to pci_irq_alloc_vectors
scsi: pm8001: switch to pci_irq_alloc_vectors
scsi: remove tsk_mgmt_response and it_nexus_response transport methods
scsi: remove eh_timed_out methods in the transport template
scsi: libsas: remove sas_scsi_timed_out
scsi: mvumi: remove fake transport template
scsi: storvsc: remove bogus code to transfer struct scatterlist
scsi: qla4xxx: remove two unused MSI-X related #defines
scsi: vmw_pvscsi: switch to pci_alloc_irq_vectors
scsi: pmcraid: switch to pci_alloc_irq_vectors
scsi: bfa: remove bfa_fcs_mod_s

Colin Ian King (3):
scsi: aacraid: rcode is unsigned and should be signed int
scsi: qla2xxx: rename {vendor|hba}_indentifer to {vendor|hba}_identifer
scsi: qedi: return via va_end to match corresponding va_start

Corentin Labbe (1):
scsi: mptlan: Remove linux/miscdevice.h from mptlan.h

Dan Carpenter (2):
scsi: megaraid_sas: array overflow in megasas_dump_frame()
scsi: dpt_i2o: double free if adpt_i2o_online_hba() fails

Dolev Raviv (3):
scsi: ufs: Improve fatal error logs
scsi: ufs: fix multiple ufs spec violation
scsi: ufs: dump debug info during failures

Don Brace (1):
scsi: hpsa: remove coalescing settings for ioaccel2

Emese Revfy (1):
scsi: esas2r: Fix format string type mistakes

Finn Thain (6):
scsi: atari_scsi: Reset DMA during bus reset only under ST-DMA lock
scsi: ncr5380: Improve target selection robustness
scsi: ncr5380: Resolve various static checker warnings
scsi: ncr5380: Reduce #include files
scsi: ncr5380: Clean up dead code and redundant macro usage
scsi: ncr5380: Shorten host info string by removing unused option macros

Gilad Broner (3):
scsi: ufs: add host state prints in failure cases
scsi: ufs: reduce printout for aborted requests
scsi: ufs: skip request abort task when previous aborts failed

Hanjun Guo (1):
scsi: remove useless acpi functions in the header file

James Smart (13):
scsi: lpfc: Fix lpfc_wwn_set return code check
scsi: lpfc: Reinstate lpfc_soft_wwn parameter
scsi: lpfc: lpfc version change to 11.2.0.4
scsi: lpfc: Add missing memory barrier
scsi: lpfc: Correct oops on vport port resets
scsi: lpfc: Deprecate lpfc_prot_sg_seg_cnt parameter
scsi: lpfc: Fix Xlane dynamic LUN set for LUN priority.
scsi: lpfc: FCoE VPort enable-disable does not bring up the VPort
scsi: lpfc: Correct host name in symbolic_name field
scsi: lpfc: Correct issue leading to oops during link reset
scsi: lpfc: Deprecate lpfc_soft_wwn parameter
scsi: lpfc: Correct error in setting OS Driver Version with FW
scsi: lpfc: Clear the VendorVersion in the PLOGI/PLOGI ACC payload

Javier Martinez Canillas (1):
scsi: ufs-qcom: Fix module autoload

Jitendra Bhivare (12):
scsi: be2iscsi: Update driver version
scsi: be2iscsi: Reinit SGL handle, CID tables after TPE
scsi: be2iscsi: Add checks to validate CID alloc/free
scsi: be2iscsi: Remove wq_name from beiscsi_hba
scsi: be2iscsi: Remove unused struct members
scsi: be2iscsi: Remove redundant receive buffers posting
scsi: be2iscsi: Fix iSCSI cmd cleanup IOCTL
scsi: be2iscsi: Add checks to validate completions
scsi: be2iscsi: Set WRB invalid bit for SkyHawk
scsi: be2iscsi: Take iscsi_task ref in abort handler
scsi: be2iscsi: Fix for crash in beiscsi_eh_device_reset
scsi: be2iscsi: Fix use of invalidate command table req

John Garry (5):
scsi: hisi_sas: downgrade internal abort exit print
scsi: hisi_sas: downgrade refclk message
scsi: hisi_sas: lock sensitive region in hisi_sas_slot_abort()
scsi: hisi_sas: lock sensitive regions when servicing CQ interrupt
scsi: hisi_sas: service v2 hw CQ ISR with tasklet

John Pittman (1):
scsi: sd: Cleaned up comment references to @sdp argument explanation.

K. Y. Srinivasan (3):
scsi: storvsc: Enable multi-queue support
scsi: storvsc: Remove the restriction on max segment size
scsi: storvsc: Enable tracking of queue depth

Kees Cook (2):
scsi: cciss: use designated initializers
scsi: hpsa: use designated initializers

Ketan Mukadam (1):
scsi: be2iscsi: Add warning message for unsupported adapter

Lee Susman (1):
scsi: ufs: add trace event for ufs commands

Long Li (3):
scsi: storvsc: properly set residual data length on errors
scsi: storvsc: properly handle SRB_ERROR when sense message is present
scsi: storvsc: use tagged SRB requests if supported by the device

Lukas Herbolt (1):
scsi: scsi_debug: Add OPTIMAL TRANSFER LENGTH GRANULARITY option.

Matthew R. Ochs (3):
scsi: cxlflash: Cleanup prints
scsi: cxlflash: Support SQ Command Mode
scsi: cxlflash: Refactor context reset to share reset logic

Nicolas Iooss (2):
scsi: qla2xxx: make msix_entries const
scsi: qla2xxx: silence -Wformat-security warning

Raghava Aditya Renukunta (24):
scsi: aacraid: update version
scsi: aacraid: Change Driver Version Prefix
scsi: aacraid: Update copyrights
scsi: aacraid: Retrieve HBA host information ioctl
scsi: aacraid: Added ioctl to trigger IOP/IWBR reset
scsi: aacraid: Added new IWBR reset
scsi: aacraid: VPD 83 type3 support
scsi: aacraid: Added support to abort cmd and reset lun
scsi: aacraid: Add task management functionality
scsi: aacraid: Include HBA direct interface
scsi: aacraid: Added support for hotplug
scsi: aacraid: Added support to set QD of attached drives
scsi: aacraid: Retrieve Queue Depth from Adapter FW
scsi: aacraid: Added support for periodic wellness sync
scsi: aacraid: Reworked aac_command_thread
scsi: aacraid: Added support for read medium error
scsi: aacraid: Added support for response path
scsi: aacraid: Process Error for response I/O
scsi: aacraid: Reworked scsi command submission path
scsi: aacraid: Retrieve and update the device types
scsi: aacraid: Added sa firmware support
scsi: aacraid: added support for init_struct_8
scsi: aacraid: Added aacraid.h include guard
scsi: aacraid: Remove duplicate irq management code

Sahitya Tummala (2):
scsi: ufs: Add sysfs node to dynamically control clock scaling
scsi: ufs: Add sysfs node to dynamically control clock gating

Sasikumar Chandrasekaran (11):
scsi: megaraid_sas: driver version upgrade
scsi: megaraid_sas: Implement the PD Map support for SAS3.5 Generic Megaraid Controllers
scsi: megaraid_sas: ldio_outstanding variable is not decremented in completion path
scsi: megaraid_sas: Enable or Disable Fast path based on the PCI Threshold Bandwidth
scsi: megaraid_sas: Add the Support for SAS3.5 Generic Megaraid Controllers Capabilities
scsi: megaraid_sas: Dynamic Raid Map Changes for SAS3.5 Generic Megaraid Controllers
scsi: megaraid_sas: SAS3.5 Generic Megaraid Controllers Fast Path for RAID 1/10 Writes
scsi: megaraid_sas: SAS3.5 Generic Megaraid Controllers Stream Detection and IO Coalescing
scsi: megaraid_sas: EEDP Escape Mode Support for SAS3.5 Generic Megaraid Controllers
scsi: megaraid_sas: 128 MSIX Support
scsi: megaraid_sas: Add new pci device Ids for SAS3.5 Generic Megaraid Controllers

Shivasharan S (39):
scsi: megaraid_sas: driver version upgrade
scsi: megaraid_sas: Change RAID_1_10_RMW_CMDS to RAID_1_PEER_CMDS and set value to 2
scsi: megaraid_sas: Indentation and smatch warning fixes
scsi: megaraid_sas: Cleanup VD_EXT_DEBUG and SPAN_DEBUG related debug prints
scsi: megaraid_sas: Increase internal command pool
scsi: megaraid_sas: Use synchronize_irq to wait for IRQs to complete
scsi: megaraid_sas: Bail out the driver load if ld_list_query fails
scsi: megaraid_sas: Change build_mpt_mfi_pass_thru to return void
scsi: megaraid_sas: During OCR, if get_ctrl_info fails do not continue with OCR
scsi: megaraid_sas: Do not set fp_possible if TM capable for non-RW syspdIO, change fp_possible to bool
scsi: megaraid_sas: Remove unused pd_index from megasas_build_ld_nonrw_fusion
scsi: megaraid_sas: megasas_return_cmd does not memset IO frame to zero
scsi: megaraid_sas: max_fw_cmds are decremented twice, remove duplicate
scsi: megaraid_sas: update can_queue only if the new value is less
scsi: megaraid_sas: Change max_cmd from u32 to u16 in all functions
scsi: megaraid_sas: set pd_after_lb from MR_BuildRaidContext and initialize pDevHandle to MR_DEVHANDLE_INVALID
scsi: megaraid_sas: latest controller OCR capability from FW before sending shutdown DCMD
scsi: megaraid_sas: avoid unaligned access in ioctl path
scsi: megaraid_sas: big endian support changes
scsi: megaraid_sas: Big endian RDPQ mode fix
scsi: megaraid_sas: MR_TargetIdToLdGet u8 to u16 and avoid invalid raid-map access
scsi: megaraid_sas: In validate raid map, raid capability is not converted to cpu format for all lds
scsi: megaraid_sas: reduce size of fusion_context and use vmalloc if kmalloc fails
scsi: megaraid_sas: add print in device removal path
scsi: megaraid_sas: enhance debug logs in OCR context
scsi: megaraid_sas: set residual bytes count during IO completion
scsi: megaraid_sas: raid 1 write performance for large io
scsi: megaraid_sas: NVME fast path io support
scsi: megaraid_sas: NVME interface target prop added
scsi: megaraid_sas: NVME Interface detection and prop settings
scsi: megaraid_sas: change issue_dcmd to return void from int
scsi: megaraid_sas: megasas_get_request_descriptor always return valid desc
scsi: megaraid_sas: Use DID_REQUEUE
scsi: megaraid_sas: RAID map is accessed for SYS PDs when use_seqnum_jbod_fp is not set
scsi: megaraid_sas: Refactor MEGASAS_IS_LOGICAL macro using sdev
scsi: megaraid_sas: 32 bit descriptor fire cmd optimization
scsi: megaraid_sas: raid 1 fast path code optimize
scsi: megaraid_sas: cpu select rework.
Revert "scsi: megaraid_sas: Enable or Disable Fast path based on the PCI Threshold Bandwidth"

Shyam Saini (1):
scsi: lpfc: Replace BUG() with BUG_ON()

Subhash Jadavani (1):
scsi: ufs: fix arguments order some trace calls

Tomas Winkler (4):
scsi: ufs: refactor device descriptor reading
scsi: ufs: ufshcd_get_max_icc_level fix endianity handling
scsi: ufs: unexport descritpor reading functions
scsi: ufs: ufshcd_query_descriptor_retry should be static

Uma Krishnan (1):
scsi: cxlflash: Cancel scheduled workers before stopping AFU

Venkat Gopalakrishnan (2):
scsi: ufs: dump hw regs on link failures
scsi: ufs-qcom: dump additional testbus registers

Wei Yongjun (2):
scsi: qedi: Fix possible memory leak in qedi_iscsi_update_conn()
scsi: be2iscsi: Use GFP_ATOMIC under spin lock

Xiang Chen (5):
scsi: hisi_sas: decrease running_req in hisi_sas_slot_task_free()
scsi: hisi_sas: fix probe ordering problem
scsi: hisi_sas: modify hard reset for directed-attached disk
scsi: hisi_sas: modify some values of ITCT table
scsi: hisi_sas: workaround v2 hw SATA IO timeout issue

subhashj@codeaurora.org (9):
scsi: ufs: kick start clock scaling only after device detection
scsi: ufs: don't suspend clock scaling during clock gating
scsi: ufs: add load based scaling of UFS gear
scsi: ufs: add time profiling support
scsi: ufs: fix setting init power mode
scsi: ufs: add capability to keep auto bkops always enabled
scsi: ufs: set default UFS power management level
scsi: ufs: provide sysfs attribute to select the PM level
scsi: ufs: add tracing support

And the diffstat:

drivers/ata/libata-eh.c | 1 +
drivers/ata/libata-transport.c | 1 -
drivers/ata/libata.h | 1 -
drivers/block/cciss.h | 30 +-
drivers/infiniband/ulp/iser/iscsi_iser.c | 1 +
drivers/infiniband/ulp/srp/ib_srp.c | 1 +
drivers/message/fusion/mptfc.c | 1 +
drivers/message/fusion/mptlan.h | 1 -
drivers/message/fusion/mptsas.c | 2 +-
drivers/s390/scsi/zfcp_scsi.c | 1 +
drivers/scsi/NCR5380.c | 64 +-
drivers/scsi/NCR5380.h | 17 +-
drivers/scsi/aacraid/aachba.c | 1288 ++++++++++++++++------
drivers/scsi/aacraid/aacraid.h | 644 +++++++++--
drivers/scsi/aacraid/commctrl.c | 342 ++++--
drivers/scsi/aacraid/comminit.c | 330 +++---
drivers/scsi/aacraid/commsup.c | 964 +++++++++++-----
drivers/scsi/aacraid/dpcsup.c | 159 ++-
drivers/scsi/aacraid/linit.c | 562 +++++++---
drivers/scsi/aacraid/nark.c | 3 +-
drivers/scsi/aacraid/rkt.c | 5 +-
drivers/scsi/aacraid/rx.c | 17 +-
drivers/scsi/aacraid/sa.c | 9 +-
drivers/scsi/aacraid/src.c | 336 ++++--
drivers/scsi/atari_scsi.c | 36 +-
drivers/scsi/be2iscsi/be.h | 3 -
drivers/scsi/be2iscsi/be_cmds.c | 41 +-
drivers/scsi/be2iscsi/be_cmds.h | 17 +-
drivers/scsi/be2iscsi/be_iscsi.c | 165 +--
drivers/scsi/be2iscsi/be_main.c | 345 +++---
drivers/scsi/be2iscsi/be_main.h | 44 +-
drivers/scsi/be2iscsi/be_mgmt.c | 117 +-
drivers/scsi/be2iscsi/be_mgmt.h | 98 +-
drivers/scsi/bfa/bfa_fcs.c | 181 +--
drivers/scsi/bfa/bfa_fcs.h | 4 -
drivers/scsi/bfa/bfad_im.c | 2 +
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 1 +
drivers/scsi/bnx2i/bnx2i_iscsi.c | 1 +
drivers/scsi/csiostor/csio_scsi.c | 2 +
drivers/scsi/cxgbi/cxgb3i/cxgb3i.c | 1 +
drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 1 +
drivers/scsi/cxlflash/common.h | 32 +-
drivers/scsi/cxlflash/lunmgt.c | 31 +-
drivers/scsi/cxlflash/main.c | 465 ++++----
drivers/scsi/cxlflash/sislite.h | 19 +-
drivers/scsi/cxlflash/superpipe.c | 183 ++--
drivers/scsi/cxlflash/vlun.c | 169 +--
drivers/scsi/dpt_i2o.c | 8 +-
drivers/scsi/esas2r/esas2r_init.c | 2 +-
drivers/scsi/esas2r/esas2r_ioctl.c | 2 +-
drivers/scsi/esas2r/esas2r_log.h | 4 +-
drivers/scsi/esas2r/esas2r_main.c | 4 +-
drivers/scsi/fcoe/fcoe.c | 1 +
drivers/scsi/fnic/fnic_main.c | 1 +
drivers/scsi/g_NCR5380.c | 45 +-
drivers/scsi/g_NCR5380.h | 56 -
drivers/scsi/hisi_sas/hisi_sas.h | 1 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 23 +-
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 2 +
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 135 ++-
drivers/scsi/hpsa.c | 8 +-
drivers/scsi/hpsa.h | 40 +-
drivers/scsi/ibmvscsi/ibmvfc.c | 1 +
drivers/scsi/ibmvscsi/ibmvscsi.c | 1 +
drivers/scsi/iscsi_tcp.c | 1 +
drivers/scsi/libiscsi.c | 5 +-
drivers/scsi/libsas/sas_init.c | 1 -
drivers/scsi/libsas/sas_internal.h | 2 -
drivers/scsi/libsas/sas_scsi_host.c | 7 -
drivers/scsi/lpfc/lpfc.h | 1 -
drivers/scsi/lpfc/lpfc_attr.c | 61 +-
drivers/scsi/lpfc/lpfc_crtn.h | 7 +-
drivers/scsi/lpfc/lpfc_els.c | 9 +-
drivers/scsi/lpfc/lpfc_hw.h | 6 +
drivers/scsi/lpfc/lpfc_scsi.c | 20 +-
drivers/scsi/lpfc/lpfc_sli.c | 13 +-
drivers/scsi/lpfc/lpfc_version.h | 2 +-
drivers/scsi/lpfc/lpfc_vport.c | 8 +
drivers/scsi/mac_scsi.c | 8 +-
drivers/scsi/megaraid/megaraid_sas.h | 199 +++-
drivers/scsi/megaraid/megaraid_sas_base.c | 648 ++++++++---
drivers/scsi/megaraid/megaraid_sas_fp.c | 468 ++++----
drivers/scsi/megaraid/megaraid_sas_fusion.c | 1334 +++++++++++++++++-----
drivers/scsi/megaraid/megaraid_sas_fusion.h | 412 ++++++-
drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 2 +
drivers/scsi/mpt3sas/mpt3sas_base.c | 20 +
drivers/scsi/mpt3sas/mpt3sas_base.h | 7 +-
drivers/scsi/mpt3sas/mpt3sas_ctl.c | 4 +-
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 56 +-
drivers/scsi/mvumi.c | 6 +-
drivers/scsi/pm8001/pm8001_init.c | 35 +-
drivers/scsi/pm8001/pm8001_sas.h | 2 -
drivers/scsi/pmcraid.c | 92 +-
drivers/scsi/pmcraid.h | 1 -
drivers/scsi/qedi/qedi_dbg.c | 9 +-
drivers/scsi/qedi/qedi_iscsi.c | 5 +-
drivers/scsi/qla2xxx/qla_def.h | 4 +-
drivers/scsi/qla2xxx/qla_gs.c | 6 +-
drivers/scsi/qla2xxx/qla_isr.c | 10 +-
drivers/scsi/qla2xxx/qla_os.c | 1 +
drivers/scsi/qla4xxx/ql4_def.h | 3 -
drivers/scsi/qla4xxx/ql4_os.c | 6 +-
drivers/scsi/scsi_debug.c | 10 +-
drivers/scsi/scsi_error.c | 4 +-
drivers/scsi/scsi_transport_fc.c | 26 +-
drivers/scsi/scsi_transport_srp.c | 21 +-
drivers/scsi/sd.c | 4 +-
drivers/scsi/snic/snic.h | 1 -
drivers/scsi/snic/snic_isr.c | 48 +-
drivers/scsi/storvsc_drv.c | 160 ++-
drivers/scsi/sun3_scsi.c | 83 +-
drivers/scsi/sun3_scsi.h | 102 --
drivers/scsi/ufs/ufs-qcom.c | 49 +-
drivers/scsi/ufs/ufs-qcom.h | 1 +
drivers/scsi/ufs/ufs.h | 12 +
drivers/scsi/ufs/ufs_quirks.h | 28 +-
drivers/scsi/ufs/ufshcd.c | 1578 +++++++++++++++++++++++----
drivers/scsi/ufs/ufshcd.h | 121 +-
drivers/scsi/ufs/ufshci.h | 3 +
drivers/scsi/vmw_pvscsi.c | 104 +-
drivers/scsi/vmw_pvscsi.h | 5 -
include/linux/libata.h | 2 +
include/scsi/libiscsi.h | 1 +
include/scsi/scsi.h | 10 -
include/scsi/scsi_transport.h | 23 -
include/scsi/scsi_transport_fc.h | 1 +
include/scsi/scsi_transport_srp.h | 8 +-
include/trace/events/ufs.h | 263 +++++
include/uapi/scsi/cxlflash_ioctl.h | 1 +
129 files changed, 9294 insertions(+), 3928 deletions(-)
delete mode 100644 drivers/scsi/g_NCR5380.h
delete mode 100644 drivers/scsi/sun3_scsi.h
create mode 100644 include/trace/events/ufs.h

James

\
 
 \ /
  Last update: 2017-02-21 02:26    [W:1.459 / U:0.412 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site