lkml.org 
[lkml]   [2017]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RESEND PATCH 0/3] mtd: nand: atmel: Add ->setup_data_interface() + PM ops
Date
Hello,

Hopefully the last resend. I double checked everything this time :-).

This patch series is adding to important features to the new Atmel NAND
controller driver:
1/ automatic SMC timings configuration based on information retrieved
during NAND detection
2/ proper ->suspend()/->resume(). Timings are properly restored when
resuming the system

This series depends on [1] and [2].

Regards,

Boris

[1]https://www.spinics.net/lists/arm-kernel/msg563780.html
[2]https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg1337235.html

Boris Brezillon (3):
mtd: nand: Pass the CS line to ->setup_data_interface()
mtd: nand: atmel: Add ->setup_data_interface() hooks
mtd: nand: atmel: Add PM ops

drivers/mtd/nand/atmel/nand-controller.c | 351 ++++++++++++++++++++++++++++++-
drivers/mtd/nand/mxc_nand.c | 12 +-
drivers/mtd/nand/nand_base.c | 22 +-
drivers/mtd/nand/s3c2410.c | 5 +-
drivers/mtd/nand/sunxi_nand.c | 7 +-
drivers/mtd/nand/tango_nand.c | 7 +-
include/linux/mtd/nand.h | 12 +-
7 files changed, 380 insertions(+), 36 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2017-02-20 22:13    [W:0.144 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site