Messages in this thread | | | From | Fabio Estevam <> | Date | Mon, 20 Feb 2017 17:18:38 -0300 | Subject | Re: [PATCH v2 2/4] arm: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual OpenFrame Cap 10.1 initial support |
| |
On Mon, Feb 20, 2017 at 5:11 PM, Fabio Estevam <festevam@gmail.com> wrote: > On Mon, Feb 20, 2017 at 5:05 PM, Jagan Teki <jagan@openedev.com> wrote: > >> +&ldb { >> + status = "okay"; >> + >> + lvds-channel@0 { >> + fsl,data-mapping = "spwg"; >> + fsl,data-width = <24>; >> + status = "okay"; >> + >> + display-timings { >> + native-mode = <&timing1>; >> + timing1: hsd100pxn1 { >> + clock-frequency = <60000000>; >> + hactive = <1280>; >> + vactive = <800>; >> + hback-porch = <40>; >> + hfront-porch = <40>; >> + vback-porch = <10>; >> + vfront-porch = <3>; >> + hsync-len = <80>; >> + vsync-len = <10>; > > hsd100pxn1 is supported by the drm simple panel driver. > > This allows you to remove the display-timings from the dts and use > compatible = "hannstar,hsd100pxn1" instead.
After looking at the timings you provided they do not match with the timings from hsd100pxn1, so it seems you have a different panel on this board.
If this is the case, then you should not put a 'hsd100pxn1' reference in the dts.
| |