lkml.org 
[lkml]   [2017]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 3/4] iio: accel: adxl345: Add SPI support
On Sun, Feb 19, 2017 at 01:12:50PM +0000, Jonathan Cameron wrote:
> On 16/02/17 10:02, Eva Rachel Retuya wrote:
> > Add SPI driver for initializing spi regmap for the adxl345 core driver.
> > The driver supports the same functionality as I2C namely the x, y, z and
> > scale readings.
> >
> > Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
> Looks nice. I didn't know about the readmask stuff in regmap so
> always good to see something new.
>

Me too. The SPI reads were unusual, and the datasheet mentions some sort of
mask to enable proper consecutive register reads. Grepped the mask and
discovered this. Since then, the reads are no longer incorrect :)

Eva

> Jonathan
> > ---
> > drivers/iio/accel/Kconfig | 13 +++++++
> > drivers/iio/accel/Makefile | 1 +
> > drivers/iio/accel/adxl345_spi.c | 75 +++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 89 insertions(+)
> > create mode 100644 drivers/iio/accel/adxl345_spi.c
> >
> > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> > index 5bdd87f..d474fed 100644
> > --- a/drivers/iio/accel/Kconfig
> > +++ b/drivers/iio/accel/Kconfig
> > @@ -21,6 +21,19 @@ config ADXL345_I2C
> > To compile this driver as a module, choose M here: the
> > module will be called adxl345_i2c.
> >
> > +config ADXL345_SPI
> > + tristate "Analog Devices ADXL345 3-Axis Digital Accelerometer SPI Driver"
> > + depends on !(INPUT_ADXL34X=y || INPUT_ADXL34X=m)
> > + depends on SPI
> > + select ADXL345
> > + select REGMAP_SPI
> > + help
> > + Say Y here if you want to build support for the Analog Devices
> > + ADXL345 3-axis digital accelerometer.
> > +
> > + To compile this driver as a module, choose M here: the
> > + module will be called adxl345_spi.
> > +
> > config BMA180
> > tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
> > depends on I2C
> > diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
> > index 3f4a6d6..31fba19 100644
> > --- a/drivers/iio/accel/Makefile
> > +++ b/drivers/iio/accel/Makefile
> > @@ -5,6 +5,7 @@
> > # When adding new entries keep the list in alphabetical order
> > obj-$(CONFIG_ADXL345) += adxl345_core.o
> > obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o
> > +obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o
> > obj-$(CONFIG_BMA180) += bma180.o
> > obj-$(CONFIG_BMA220) += bma220_spi.o
> > obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
> > diff --git a/drivers/iio/accel/adxl345_spi.c b/drivers/iio/accel/adxl345_spi.c
> > new file mode 100644
> > index 0000000..5fcd1fa
> > --- /dev/null
> > +++ b/drivers/iio/accel/adxl345_spi.c
> > @@ -0,0 +1,75 @@
> > +/*
> > + * ADXL345 3-Axis Digital Accelerometer
> > + *
> > + * Copyright (c) 2017 Eva Rachel Retuya <eraretuya@gmail.com>
> > + *
> > + * This file is subject to the terms and conditions of version 2 of
> > + * the GNU General Public License. See the file COPYING in the main
> > + * directory of this archive for more details.
> > + *
> > + * SPI driver for ADXL345
> > + */
> > +
> > +#include <linux/module.h>
> > +#include <linux/regmap.h>
> > +#include <linux/spi/spi.h>
> > +
> > +#include "adxl345.h"
> > +
> > +#define ADXL345_MAX_SPI_FREQ_HZ 5000000
> > +
> > +static const struct regmap_config adxl345_spi_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > + /* Setting bits 7 and 6 enables multiple-byte read */
> > + .read_flag_mask = BIT(7) | BIT(6),
> Nice. I didn't know about that one ;)
> > +};
> > +
> > +static int adxl345_spi_probe(struct spi_device *spi)
> > +{
> > + struct regmap *regmap;
> > + const struct spi_device_id *id = spi_get_device_id(spi);
> > +
> > + /* Bail out if max_speed_hz exceeds 5 MHz */
> > + if (spi->max_speed_hz > ADXL345_MAX_SPI_FREQ_HZ) {
> > + dev_err(&spi->dev, "SPI CLK, %d Hz exceeds 5 MHz\n",
> > + spi->max_speed_hz);
> > + return -EINVAL;
> > + }
> > +
> > + regmap = devm_regmap_init_spi(spi, &adxl345_spi_regmap_config);
> > + if (IS_ERR(regmap)) {
> > + dev_err(&spi->dev, "Error initializing spi regmap: %d\n",
> > + (int)PTR_ERR(regmap));
> > + return PTR_ERR(regmap);
> > + }
> > +
> > + return adxl345_common_probe(&spi->dev, regmap, id->name);
> > +}
> > +
> > +static int adxl345_spi_remove(struct spi_device *spi)
> > +{
> > + return adxl345_common_remove(&spi->dev);
> > +}
> > +
> > +static const struct spi_device_id adxl345_spi_id[] = {
> > + { "adxl345", 0 },
> > + { }
> > +};
> > +
> > +MODULE_DEVICE_TABLE(spi, adxl345_spi_id);
> > +
> > +static struct spi_driver adxl345_spi_driver = {
> > + .driver = {
> > + .name = "adxl345_spi",
> > + },
> > + .probe = adxl345_spi_probe,
> > + .remove = adxl345_spi_remove,
> > + .id_table = adxl345_spi_id,
> > +};
> > +
> > +module_spi_driver(adxl345_spi_driver);
> > +
> > +MODULE_AUTHOR("Eva Rachel Retuya <eraretuya@gmail.com>");
> > +MODULE_DESCRIPTION("ADXL345 3-Axis Digital Accelerometer SPI driver");
> > +MODULE_LICENSE("GPL v2");
>

\
 
 \ /
  Last update: 2017-02-20 07:47    [W:0.091 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site