lkml.org 
[lkml]   [2017]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/3] Input: ps2smbus - force PS/2 disable before SMBus gets resumed
Date
On some cases, the touchpad can be reset during resume. We need to
send the PS/2 command PSMOUSE_CMD_DISABLE before attempting to contact
the touchpad over SMBus. Given that the .connect() callback is called
in a separate thread in kseriod, we need to wait for it in the main
thread before leaving the resume of the platform device.

From what I can see, the I2C client is then blocked until the platform
device gets resumed, even if the I2C client is not a child of the platform
device.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
---

Hi Dmitry,

this morning the touchpad was dead after the resume. So we need to
actually be sure the PS/2 state is disabled before attempting to
use the SMBus connection.

I am not 100% sure the I2C client will be waiting for the platform
device to be resumed given that I can't find a way to mark the I2C
as a child of the other one. However, it seems that the ordering
is correct nevertheless.

Cheers,
Benjamin


new in v2

drivers/input/misc/ps2_smbus.c | 42 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)

diff --git a/drivers/input/misc/ps2_smbus.c b/drivers/input/misc/ps2_smbus.c
index b58c113..0b03224 100644
--- a/drivers/input/misc/ps2_smbus.c
+++ b/drivers/input/misc/ps2_smbus.c
@@ -49,6 +49,7 @@ struct ps2smbus_work {

struct ps2smbus_serio {
struct ps2dev ps2dev;
+ bool suspended;
};

static struct serio_device_id ps2smbus_serio_ids[] = {
@@ -121,8 +122,26 @@ static int ps2smbus_connect(struct serio *serio, struct serio_driver *drv)
return error;
}

+static void ps2smbus_cleanup(struct serio *serio)
+{
+ struct ps2smbus_serio *ps2smbus = serio_get_drvdata(serio);
+
+ ps2smbus->suspended = true;
+}
+
static int ps2smbus_reconnect(struct serio *serio)
{
+ struct ps2smbus_serio *ps2smbus = serio_get_drvdata(serio);
+ int error;
+
+ error = ps2_command(&ps2smbus->ps2dev, NULL, PSMOUSE_CMD_DISABLE);
+ if (error)
+ dev_warn(&serio->dev, "Failed to deactivate PS/2 mouse on %s\n",
+ serio->phys);
+
+ ps2smbus->suspended = false;
+ wake_up_interruptible(&ps2smbus_serio_wait);
+
return 0;
}

@@ -144,6 +163,7 @@ static struct serio_driver ps2smbus_serio_drv = {
.id_table = ps2smbus_serio_ids,
.interrupt = ps2smbus_interrupt,
.connect = ps2smbus_connect,
+ .cleanup = ps2smbus_cleanup,
.reconnect = ps2smbus_reconnect,
.disconnect = ps2smbus_disconnect,
.manual_bind = true,
@@ -328,6 +348,27 @@ static int ps2smbus_remove(struct platform_device *pdev)
return 0;
}

+static int __maybe_unused ps2smbus_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ps2smbus *ps2smbus = platform_get_drvdata(pdev);
+ struct serio *serio = ps2smbus->serio;
+ struct ps2smbus_serio *ps2smbus_serio = serio_get_drvdata(serio);
+ int error;
+
+ error = wait_event_interruptible_timeout(ps2smbus_serio_wait,
+ ps2smbus_serio->suspended == false,
+ msecs_to_jiffies(1000));
+ if (error <= 10)
+ dev_warn(&serio->dev,
+ "error while waiting for the PS/2 node to be ready: %d\n",
+ error);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ps2smbus_pm_ops, NULL, ps2smbus_resume);
+
static const struct platform_device_id ps2smbus_id_table[] = {
{ .name = "rmi4", .driver_data = PS2SMBUS_SYNAPTICS_RMI4 },
{ }
@@ -337,6 +378,7 @@ MODULE_DEVICE_TABLE(platform, ps2smbus_id_table);
static struct platform_driver ps2smbus_drv = {
.driver = {
.name = "ps2smbus",
+ .pm = &ps2smbus_pm_ops,
},
.probe = ps2smbus_probe,
.remove = ps2smbus_remove,
--
2.9.3
\
 
 \ /
  Last update: 2017-02-17 12:47    [W:0.043 / U:1.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site