lkml.org 
[lkml]   [2017]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next] virito-net: set queues after reset during xdp_set
Date
We set queues before reset which will cause a crash[1]. This is
because is_xdp_raw_buffer_queue() depends on the old xdp queue pairs
number to do the correct detection. So fix this by:

- set queues after reset, to keep the old vi->curr_queue_pairs. (in
fact setting queues before reset does not works since after feature
set, all queue pairs were enabled by default during reset).
- change xdp_queue_pairs only after virtnet_reset() is succeed.

[1]

[ 74.328168] general protection fault: 0000 [#1] SMP
[ 74.328625] Modules linked in: nfsd xfs libcrc32c virtio_net virtio_pci
[ 74.329117] CPU: 0 PID: 2849 Comm: xdp2 Not tainted 4.10.0-rc7+ #499
[ 74.329577] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.1-0-g8891697-prebuilt.qemu-project.org 04/01/2014
[ 74.330424] task: ffff88007a894000 task.stack: ffffc90004388000
[ 74.330844] RIP: 0010:skb_release_head_state+0x28/0x80
[ 74.331298] RSP: 0018:ffffc9000438b8d0 EFLAGS: 00010206
[ 74.331676] RAX: 0000000000000000 RBX: ffff88007ad96300 RCX: 0000000000000000
[ 74.332217] RDX: ffff88007fc137a8 RSI: ffff88007fc0db28 RDI: 0001bf00000001be
[ 74.332758] RBP: ffffc9000438b8d8 R08: 000000000005008f R09: 00000000000005f9
[ 74.333274] R10: ffff88007d001700 R11: ffffffff820a8a4d R12: ffff88007ad96300
[ 74.333787] R13: 0000000000000002 R14: ffff880036604000 R15: 000077ff80000000
[ 74.334308] FS: 00007fc70d8a7b40(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
[ 74.334891] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 74.335314] CR2: 00007fff4144a710 CR3: 000000007ab56000 CR4: 00000000003406f0
[ 74.335830] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 74.336373] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 74.336895] Call Trace:
[ 74.337086] skb_release_all+0xd/0x30
[ 74.337356] consume_skb+0x2c/0x90
[ 74.337607] free_unused_bufs+0x1ff/0x270 [virtio_net]
[ 74.337988] ? vp_synchronize_vectors+0x3b/0x60 [virtio_pci]
[ 74.338398] virtnet_xdp+0x21e/0x440 [virtio_net]
[ 74.338741] dev_change_xdp_fd+0x101/0x140
[ 74.339048] do_setlink+0xcf4/0xd20
[ 74.339304] ? symcmp+0xf/0x20
[ 74.339529] ? mls_level_isvalid+0x52/0x60
[ 74.339828] ? mls_range_isvalid+0x43/0x50
[ 74.340135] ? nla_parse+0xa0/0x100
[ 74.340400] rtnl_setlink+0xd4/0x120
[ 74.340664] ? cpumask_next_and+0x30/0x50
[ 74.340966] rtnetlink_rcv_msg+0x7f/0x1f0
[ 74.341259] ? sock_has_perm+0x59/0x60
[ 74.341586] ? napi_consume_skb+0xe2/0x100
[ 74.342010] ? rtnl_newlink+0x890/0x890
[ 74.342435] netlink_rcv_skb+0x92/0xb0
[ 74.342846] rtnetlink_rcv+0x23/0x30
[ 74.343277] netlink_unicast+0x162/0x210
[ 74.343677] netlink_sendmsg+0x2db/0x390
[ 74.343968] sock_sendmsg+0x33/0x40
[ 74.344233] SYSC_sendto+0xee/0x160
[ 74.344482] ? SYSC_bind+0xb0/0xe0
[ 74.344806] ? sock_alloc_file+0x92/0x110
[ 74.345106] ? fd_install+0x20/0x30
[ 74.345360] ? sock_map_fd+0x3f/0x60
[ 74.345586] SyS_sendto+0x9/0x10
[ 74.345790] entry_SYSCALL_64_fastpath+0x1a/0xa9
[ 74.346086] RIP: 0033:0x7fc70d1b8f6d
[ 74.346312] RSP: 002b:00007fff4144a708 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
[ 74.346785] RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007fc70d1b8f6d
[ 74.347244] RDX: 000000000000002c RSI: 00007fff4144a720 RDI: 0000000000000003
[ 74.347683] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
[ 74.348544] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff4144bd90
[ 74.349082] R13: 0000000000000002 R14: 0000000000000002 R15: 00007fff4144cda0
[ 74.349607] Code: 00 00 00 55 48 89 e5 53 48 89 fb 48 8b 7f 58 48 85 ff 74 0e 40 f6 c7 01 74 3d 48 c7 43 58 00 00 00 00 48 8b 7b 68 48 85 ff 74 05 <f0> ff 0f 74 20 48 8b 43 60 48 85 c0 74 14 65 8b 15 f3 ab 8d 7e
[ 74.351008] RIP: skb_release_head_state+0x28/0x80 RSP: ffffc9000438b8d0
[ 74.351625] ---[ end trace fe6e19fd11cfc80b ]---

Fixes: 2de2f7f40ef9 ("virtio_net: XDP support for adjust_head")
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
drivers/net/virtio_net.c | 35 ++++++++++++++++++-----------------
1 file changed, 18 insertions(+), 17 deletions(-)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 11e2853..9ff959c 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -1775,7 +1775,7 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog)
unsigned long int max_sz = PAGE_SIZE - sizeof(struct padded_vnet_hdr);
struct virtnet_info *vi = netdev_priv(dev);
struct bpf_prog *old_prog;
- u16 oxdp_qp, xdp_qp = 0, curr_qp;
+ u16 xdp_qp = 0, curr_qp;
int i, err;

if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_GUEST_TSO4) ||
@@ -1813,24 +1813,24 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog)
return PTR_ERR(prog);
}

- err = _virtnet_set_queues(vi, curr_qp + xdp_qp);
- if (err) {
- dev_warn(&dev->dev, "XDP Device queue allocation failure.\n");
- goto virtio_queue_err;
- }
-
- oxdp_qp = vi->xdp_queue_pairs;
-
/* Changing the headroom in buffers is a disruptive operation because
* existing buffers must be flushed and reallocated. This will happen
* when a xdp program is initially added or xdp is disabled by removing
* the xdp program resulting in number of XDP queues changing.
*/
if (vi->xdp_queue_pairs != xdp_qp) {
- vi->xdp_queue_pairs = xdp_qp;
err = virtnet_reset(vi);
- if (err)
+ if (err) {
+ dev_warn(&dev->dev, "XDP reset failure.\n");
goto virtio_reset_err;
+ }
+ vi->xdp_queue_pairs = xdp_qp;
+ }
+
+ err = _virtnet_set_queues(vi, curr_qp + xdp_qp);
+ if (err) {
+ dev_warn(&dev->dev, "XDP Device queue allocation failure.\n");
+ goto virtio_queue_err;
}

netif_set_real_num_rx_queues(dev, curr_qp + xdp_qp);
@@ -1844,17 +1844,18 @@ static int virtnet_xdp_set(struct net_device *dev, struct bpf_prog *prog)

return 0;

+virtio_queue_err:
+ /* Should not happen, after reset, all queue pairs were
+ * enabled by default.
+ */
+ vi->curr_queue_pairs = vi->max_queue_pairs;
+ netif_set_real_num_tx_queues(dev, vi->curr_queue_pairs);
+ netif_set_real_num_rx_queues(dev, vi->curr_queue_pairs);
virtio_reset_err:
/* On reset error do our best to unwind XDP changes inflight and return
* error up to user space for resolution. The underlying reset hung on
* us so not much we can do here.
*/
- dev_warn(&dev->dev, "XDP reset failure and queues unstable\n");
- vi->xdp_queue_pairs = oxdp_qp;
-virtio_queue_err:
- /* On queue set error we can unwind bpf ref count and user space can
- * retry this is most likely an allocation failure.
- */
if (prog)
bpf_prog_sub(prog, vi->max_queue_pairs - 1);
return err;
--
2.7.4
\
 
 \ /
  Last update: 2017-02-15 10:10    [W:0.235 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site