lkml.org 
[lkml]   [2017]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 3/3] [media] dvbsky: MyGica T230C support
From
Date
On 02/15/2017 03:51 AM, Stefan Brüns wrote:
> Mygica T230 DVB-T/T2/C USB stick support. It uses the same FX2/Si2168
> bridge/demodulator combo as the other devices supported by the driver,
> but uses the Si2141 tuner.
> Several DVB-T (MPEG2) and DVB-T2 (H.265) channels were tested, as well as
> the include remote control.
>
> Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
> ---
> v2: add support to the dvbsky driver instead of cxusb, correct RC
> model
> ---
> drivers/media/dvb-core/dvb-usb-ids.h | 1 +
> drivers/media/usb/dvb-usb-v2/dvbsky.c | 91 +++++++++++++++++++++++++++++++++++
> 2 files changed, 92 insertions(+)
>
> diff --git a/drivers/media/dvb-core/dvb-usb-ids.h b/drivers/media/dvb-core/dvb-usb-ids.h
> index a7a4674ccc40..ce4a3d574dd7 100644
> --- a/drivers/media/dvb-core/dvb-usb-ids.h
> +++ b/drivers/media/dvb-core/dvb-usb-ids.h
> @@ -380,6 +380,7 @@
> #define USB_PID_SONY_PLAYTV 0x0003
> #define USB_PID_MYGICA_D689 0xd811
> #define USB_PID_MYGICA_T230 0xc688
> +#define USB_PID_MYGICA_T230C 0xc689
> #define USB_PID_ELGATO_EYETV_DIVERSITY 0x0011
> #define USB_PID_ELGATO_EYETV_DTT 0x0021
> #define USB_PID_ELGATO_EYETV_DTT_2 0x003f
> diff --git a/drivers/media/usb/dvb-usb-v2/dvbsky.c b/drivers/media/usb/dvb-usb-v2/dvbsky.c
> index 02dbc6c45423..729496e5a52e 100644
> --- a/drivers/media/usb/dvb-usb-v2/dvbsky.c
> +++ b/drivers/media/usb/dvb-usb-v2/dvbsky.c
> @@ -665,6 +665,68 @@ static int dvbsky_t330_attach(struct dvb_usb_adapter *adap)
> return ret;
> }
>
> +static int dvbsky_mygica_t230c_attach(struct dvb_usb_adapter *adap)
> +{
> + struct dvbsky_state *state = adap_to_priv(adap);
> + struct dvb_usb_device *d = adap_to_d(adap);
> + int ret = 0;

you could return ret completely as you don't assign its value runtime

> + struct i2c_adapter *i2c_adapter;
> + struct i2c_client *client_demod, *client_tuner;
> + struct i2c_board_info info;
> + struct si2168_config si2168_config;
> + struct si2157_config si2157_config;
> +
> + /* attach demod */
> + memset(&si2168_config, 0, sizeof(si2168_config));

prefer sizeof dst

> + si2168_config.i2c_adapter = &i2c_adapter;
> + si2168_config.fe = &adap->fe[0];
> + si2168_config.ts_mode = SI2168_TS_PARALLEL;
> + si2168_config.ts_clock_inv = 1;
it has boolean type

> + memset(&info, 0, sizeof(struct i2c_board_info));
> + strlcpy(info.type, "si2168", I2C_NAME_SIZE);
I would prefer sizeof dst here too.

> + info.addr = 0x64;
> + info.platform_data = &si2168_config;
> +
> + request_module(info.type);
Use module name here. Even it is same than device id on that case, it is
not always the case.

> + client_demod = i2c_new_device(&d->i2c_adap, &info);
> + if (client_demod == NULL ||
> + client_demod->dev.driver == NULL)

You did not ran checkpatch.pl for that patch? or doesn't it complain
anymore about these?

> + goto fail_demod_device;
> + if (!try_module_get(client_demod->dev.driver->owner))
> + goto fail_demod_module;
> +
> + /* attach tuner */
> + memset(&si2157_config, 0, sizeof(si2157_config));
> + si2157_config.fe = adap->fe[0];
> + si2157_config.if_port = 0;
> + memset(&info, 0, sizeof(struct i2c_board_info));
> + strlcpy(info.type, "si2141", I2C_NAME_SIZE);
> + info.addr = 0x60;
> + info.platform_data = &si2157_config;
> +
> + request_module("si2157");
> + client_tuner = i2c_new_device(i2c_adapter, &info);
> + if (client_tuner == NULL ||
> + client_tuner->dev.driver == NULL)
> + goto fail_tuner_device;
> + if (!try_module_get(client_tuner->dev.driver->owner))
> + goto fail_tuner_module;
> +
> + state->i2c_client_demod = client_demod;
> + state->i2c_client_tuner = client_tuner;
> + return ret;
> +fail_tuner_module:
> + i2c_unregister_device(client_tuner);
> +fail_tuner_device:
> + module_put(client_demod->dev.driver->owner);
> +fail_demod_module:
> + i2c_unregister_device(client_demod);
> +fail_demod_device:
> + ret = -ENODEV;
> + return ret;
> +}
> +
> +
> static int dvbsky_identify_state(struct dvb_usb_device *d, const char **name)
> {
> dvbsky_gpio_ctrl(d, 0x04, 1);
> @@ -830,6 +892,32 @@ static struct dvb_usb_device_properties dvbsky_t330_props = {
> }
> };
>
> +static struct dvb_usb_device_properties mygica_t230c_props = {
> + .driver_name = KBUILD_MODNAME,
> + .owner = THIS_MODULE,
> + .adapter_nr = adapter_nr,
> + .size_of_priv = sizeof(struct dvbsky_state),
> +
> + .generic_bulk_ctrl_endpoint = 0x01,
> + .generic_bulk_ctrl_endpoint_response = 0x81,
> + .generic_bulk_ctrl_delay = DVBSKY_MSG_DELAY,
> +
> + .i2c_algo = &dvbsky_i2c_algo,
> + .frontend_attach = dvbsky_mygica_t230c_attach,
> + .init = dvbsky_init,
> + .get_rc_config = dvbsky_get_rc_config,
> + .streaming_ctrl = dvbsky_streaming_ctrl,
> + .identify_state = dvbsky_identify_state,
> + .exit = dvbsky_exit,
> +
> + .num_adapters = 1,
> + .adapter = {
> + {
> + .stream = DVB_USB_STREAM_BULK(0x82, 8, 4096),
> + }
> + }
> +};
> +
> static const struct usb_device_id dvbsky_id_table[] = {
> { DVB_USB_DEVICE(0x0572, 0x6831,
> &dvbsky_s960_props, "DVBSky S960/S860", RC_MAP_DVBSKY) },
> @@ -858,6 +946,9 @@ static const struct usb_device_id dvbsky_id_table[] = {
> { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_S2_R4,
> &dvbsky_s960_props, "Terratec Cinergy S2 Rev.4",
> RC_MAP_DVBSKY) },
> + { DVB_USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_T230C,
> + &mygica_t230c_props, "Mygica T230C DVB-T/T2/C",

Drop supported DTV standard names from device name. Also it is MyGica
not Mygica.

> + RC_MAP_TOTAL_MEDIA_IN_HAND_02) },
> { }
> };
> MODULE_DEVICE_TABLE(usb, dvbsky_id_table);
>

Fix those mentioned issues and ran patch against checkpatch.pl to ensure
there is no remaining issues. After that whole patch set should be ok.

regards
Antti

--
http://palosaari.fi/

\
 
 \ /
  Last update: 2017-02-15 09:27    [W:0.314 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site