lkml.org 
[lkml]   [2017]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: Regression in next with use printk_safe buffers in printk
    Hi,

    * Sergey Senozhatsky <sergey.senozhatsky@gmail.com> [170214 08:03]:
    > Hello,
    >
    > Cc Rafael, just in case

    Found another issue on booting ARM devices, so adding Russell too.

    > On (02/13/17 10:59), Tony Lindgren wrote:
    > > Looks like commit f975237b7682 ("printk: use printk_safe buffers in
    > > printk") causes "possible circular locking dependency detected " for
    > > me on the first suspend.
    >
    > thanks for the report.
    >
    > > Reverting the following four patches in next makes it go away:
    > >
    > > d9c23523ed98 ("printk: drop call_console_drivers() unused param")
    > > de6fcbdb68b2 ("printk: convert the rest to printk-safe")
    > > 8b1742c9c207 ("printk: remove zap_locks() function")
    > > f975237b7682 ("printk: use printk_safe buffers in printk")
    >
    >
    > these patches basically just enable locked where it previously was
    > forcibly turned off. no timekeeping/pm/sched/etc code was modified.

    Below is another issue I noticed caused by commit f975237b7682 that
    I noticed during booting.

    Regards,

    Tony

    8< --------------------------
    [ 2.581939] hw-breakpoint: Failed to enable monitor mode on CPU 0.
    [ 2.591613] hw-breakpoint: CPU 0 failed to disable vector catch
    [ 2.597686]
    [ 2.597717] ===============================
    [ 2.597717] [ ERR: suspicious RCU usage. ]
    [ 2.597717] 4.10.0-rc8-next-20170215+ #119 Not tainted
    [ 2.597717] -------------------------------
    [ 2.597717] ./include/trace/events/printk.h:32 suspicious rcu_dereference_check() usage!
    [ 2.597717]
    [ 2.597717] other info that might help us debug this:
    [ 2.597717]
    [ 2.597717]
    [ 2.597717] RCU used illegally from idle CPU!
    [ 2.597717] rcu_scheduler_active = 2, debug_locks = 0
    [ 2.597747] RCU used illegally from extended quiescent state!
    [ 2.597747] 2 locks held by swapper/0/0:
    [ 2.597747] #0: (cpu_pm_notifier_lock){......}, at: [<c0237e2c>] cpu_pm_exit+0x10/0x54
    [ 2.597747] #1: (console_lock){+.+.+.}, at: [<c01ab350>] vprintk_emit+0x264/0x474
    [ 2.597747]
    [ 2.597747] stack backtrace:
    [ 2.597778] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-rc8-next-20170215+ #119
    [ 2.597778] Hardware name: Generic OMAP4 (Flattened Device Tree)
    [ 2.597778] [<c0110228>] (unwind_backtrace) from [<c010c224>] (show_stack+0x10/0x14)
    [ 2.597778] [<c010c224>] (show_stack) from [<c04ca8a0>] (dump_stack+0xac/0xe0)
    [ 2.597778] [<c04ca8a0>] (dump_stack) from [<c01ab084>] (console_unlock+0x5e8/0x650)
    [ 2.597778] [<c01ab084>] (console_unlock) from [<c01ab35c>] (vprintk_emit+0x270/0x474)
    [ 2.597778] [<c01ab35c>] (vprintk_emit) from [<c01ab6f0>] (vprintk_default+0x20/0x28)
    [ 2.597808] [<c01ab6f0>] (vprintk_default) from [<c0250c94>] (printk+0x20/0x30)
    [ 2.597808] [<c0250c94>] (printk) from [<c0111004>] (reset_ctrl_regs+0x108/0x288)
    [ 2.597808] [<c0111004>] (reset_ctrl_regs) from [<c0111220>] (dbg_cpu_pm_notify+0x28/0x30)
    [ 2.597808] [<c0111220>] (dbg_cpu_pm_notify) from [<c015f3ac>] (notifier_call_chain+0x44/0x80)
    [ 2.597808] [<c015f3ac>] (notifier_call_chain) from [<c0237e48>] (cpu_pm_exit+0x2c/0x54)
    [ 2.597808] [<c0237e48>] (cpu_pm_exit) from [<c0126ca0>] (omap_enter_idle_coupled+0x80/0x208)
    [ 2.597808] [<c0126ca0>] (omap_enter_idle_coupled) from [<c0680d80>] (cpuidle_enter_state+0x118/0x4ac)
    [ 2.597808] [<c0680d80>] (cpuidle_enter_state) from [<c0682e54>] (cpuidle_enter_state_coupled+0x3a8/0x40c)
    [ 2.597839] [<c0682e54>] (cpuidle_enter_state_coupled) from [<c0190c04>] (do_idle+0x1a4/0x218)
    [ 2.597839] [<c0190c04>] (do_idle) from [<c0190ffc>] (cpu_startup_entry+0x18/0x1c)
    [ 2.597839] [<c0190ffc>] (cpu_startup_entry) from [<c0c00c40>] (start_kernel+0x35c/0x3d4)
    [ 2.597839] [<c0c00c40>] (start_kernel) from [<8000807c>] (0x8000807c)

    \
     
     \ /
      Last update: 2017-02-15 19:02    [W:2.885 / U:0.480 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site