lkml.org 
[lkml]   [2017]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] reset: Add i.MX7 SRC reset driver
On Mon, Feb 06, 2017 at 07:08:36AM -0800, Andrey Smirnov wrote:
> This driver exposes various reset faculties, impelented by System Reset
> Controller IP block, as a reset driver. Currently only PCIE related
> reset lines are implemented.
>
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
> .../devicetree/bindings/reset/fsl,imx7-src.txt | 47 +++++++
> drivers/reset/Kconfig | 8 ++
> drivers/reset/Makefile | 1 +
> drivers/reset/reset-imx7.c | 149 +++++++++++++++++++++
> include/dt-bindings/reset/imx7-reset.h | 28 ++++
> 5 files changed, 233 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
> create mode 100644 drivers/reset/reset-imx7.c
> create mode 100644 include/dt-bindings/reset/imx7-reset.h
>
> diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
> new file mode 100644
> index 0000000..19a77f9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
> @@ -0,0 +1,47 @@
> +Freescale i.MX7 System Reset Controller
> +======================================
> +
> +Please also refer to reset.txt in this directory for common reset
> +controller binding usage.
> +
> +Required properties:
> +- compatible: Should be "fsl,imx7-src", "syscon"

Doesn't match the example. This should be specific. I assume there's
more than one i.MX7?

> +- reg: should be register base and length as documented in the
> + datasheet
> +- interrupts: Should contain SRC interrupt
> +- #reset-cells: 1, see below
> +
> +example:
> +
> +src: src@30390000 {

reset-controller@...

> + compatible = "fsl,imx7d-src", "syscon";
> + reg = <0x30390000 0x10000>;

Really has 64KB of registers or that's just the block spacing. Assuming
the actual size is smaller, you are eating up valuable lowmem space by
mapping all 64KB.

> + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> + #reset-cells = <1>;
> +};
> +
> +
> +Specifying reset lines connected to IP modules
> +==============================================
> +
> +The system reset controller can be used to reset various set of
> +peripherals. Device nodes that need access to reset lines should
> +specify them as a reset phandle in their corresponding node as
> +specified in reset.txt.
> +
> +Example:
> +
> + pcie: pcie@0x33800000 {

Drop the 0x.

> +
> + ...
> +
> + resets = <&src IMX7_RESET_PCIEPHY>,
> + <&src IMX7_RESET_PCIE_CTRL_APPS>;
> + reset-names = "pciephy", "apps";
> +
> + ...
> + };
> +
> +
> +For list of all valid reset indicies see
> +<dt-bindings/reset/imx7-reset.h>

\
 
 \ /
  Last update: 2017-02-10 16:47    [W:0.046 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site