lkml.org 
[lkml]   [2017]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: armada-38x add node labels
Date
As was done with Armada XP, add node labels to Armada 38x common and SoC
specific nodes to make them easier to reference in board device trees.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---
arch/arm/boot/dts/armada-385.dtsi | 20 +++++++++-----------
arch/arm/boot/dts/armada-388.dtsi | 9 ++++-----
arch/arm/boot/dts/armada-38x.dtsi | 38 +++++++++++++++++++-------------------
3 files changed, 32 insertions(+), 35 deletions(-)

diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
index 8e63be33472e..7fcc4c4885cf 100644
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -70,13 +70,7 @@
};

soc {
- internal-regs {
- pinctrl@18000 {
- compatible = "marvell,mv88f6820-pinctrl";
- };
- };
-
- pcie-controller {
+ pciec: pcie-controller {
compatible = "marvell,armada-370-pcie";
status = "disabled";
device_type = "pci";
@@ -106,7 +100,7 @@
* configured in x4 by the bootloader, then
* pcie@4,0 is not available.
*/
- pcie@1,0 {
+ pcie1: pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
@@ -124,7 +118,7 @@
};

/* x1 port */
- pcie@2,0 {
+ pcie2: pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
@@ -142,7 +136,7 @@
};

/* x1 port */
- pcie@3,0 {
+ pcie3: pcie@3,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
reg = <0x1800 0 0 0 0>;
@@ -163,7 +157,7 @@
* x1 port only available when pcie@1,0 is
* configured as a x1 port
*/
- pcie@4,0 {
+ pcie4: pcie@4,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
reg = <0x2000 0 0 0 0>;
@@ -182,3 +176,7 @@
};
};
};
+
+&pinctrl {
+ compatible = "marvell,mv88f6820-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-388.dtsi b/arch/arm/boot/dts/armada-388.dtsi
index 564fa5937e25..1c0d151b2aaa 100644
--- a/arch/arm/boot/dts/armada-388.dtsi
+++ b/arch/arm/boot/dts/armada-388.dtsi
@@ -50,13 +50,8 @@
model = "Marvell Armada 388 family SoC";
compatible = "marvell,armada388", "marvell,armada385",
"marvell,armada380";
-
soc {
internal-regs {
- pinctrl@18000 {
- compatible = "marvell,mv88f6828-pinctrl";
- };
-
sata@e0000 {
compatible = "marvell,armada-380-ahci";
reg = <0xe0000 0x2000>;
@@ -68,3 +63,7 @@
};
};
};
+
+&pinctrl {
+ compatible = "marvell,mv88f6828-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 79b767507eab..c558a5d6a21f 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -82,7 +82,7 @@
reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
};

- devbus-bootcs {
+ devbus_bootcs: devbus-bootcs {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -92,7 +92,7 @@
status = "disabled";
};

- devbus-cs0 {
+ devbus_cs0: devbus-cs0 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -102,7 +102,7 @@
status = "disabled";
};

- devbus-cs1 {
+ devbus_cs1: devbus-cs1 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -112,7 +112,7 @@
status = "disabled";
};

- devbus-cs2 {
+ devbus_cs2: devbus-cs2 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -122,7 +122,7 @@
status = "disabled";
};

- devbus-cs3 {
+ devbus_cs3: devbus-cs3 {
compatible = "marvell,mvebu-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -339,7 +339,7 @@
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
};

- system-controller@18200 {
+ systemc: system-controller@18200 {
compatible = "marvell,armada-380-system-controller",
"marvell,armada-370-xp-system-controller";
reg = <0x18200 0x100>;
@@ -373,7 +373,7 @@
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};

- timer@20300 {
+ timer: timer@20300 {
compatible = "marvell,armada-380-timer",
"marvell,armada-xp-timer";
reg = <0x20300 0x30>, <0x21040 0x30>;
@@ -387,14 +387,14 @@
clock-names = "nbclk", "fixed";
};

- watchdog@20300 {
+ watchdog: watchdog@20300 {
compatible = "marvell,armada-380-wdt";
reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
clocks = <&coreclk 2>, <&refclk>;
clock-names = "nbclk", "fixed";
};

- cpurst@20800 {
+ cpurst: cpurst@20800 {
compatible = "marvell,armada-370-cpu-reset";
reg = <0x20800 0x10>;
};
@@ -404,12 +404,12 @@
reg = <0x20d20 0x6c>;
};

- coherency-fabric@21010 {
+ coherencyfab: coherency-fabric@21010 {
compatible = "marvell,armada-380-coherency-fabric";
reg = <0x21010 0x1c>;
};

- pmsu@22000 {
+ pmsu: pmsu@22000 {
compatible = "marvell,armada-380-pmsu";
reg = <0x22000 0x1000>;
};
@@ -451,7 +451,7 @@
status = "disabled";
};

- usb@58000 {
+ usb0: usb@58000 {
compatible = "marvell,orion-ehci";
reg = <0x58000 0x500>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
@@ -459,7 +459,7 @@
status = "disabled";
};

- xor@60800 {
+ xor0: xor@60800 {
compatible = "marvell,armada-380-xor", "marvell,orion-xor";
reg = <0x60800 0x100
0x60a00 0x100>;
@@ -479,7 +479,7 @@
};
};

- xor@60900 {
+ xor1: xor@60900 {
compatible = "marvell,armada-380-xor", "marvell,orion-xor";
reg = <0x60900 0x100
0x60b00 0x100>;
@@ -507,7 +507,7 @@
clocks = <&gateclk 4>;
};

- crypto@90000 {
+ cesa: crypto@90000 {
compatible = "marvell,armada-38x-crypto";
reg = <0x90000 0x10000>;
reg-names = "regs";
@@ -522,7 +522,7 @@
marvell,crypto-sram-size = <0x800>;
};

- rtc@a3800 {
+ rtc: rtc@a3800 {
compatible = "marvell,armada-380-rtc";
reg = <0xa3800 0x20>, <0x184a0 0x0c>;
reg-names = "rtc", "rtc-soc";
@@ -561,13 +561,13 @@
clock-output-names = "nand";
};

- thermal@e8078 {
+ thermal: thermal@e8078 {
compatible = "marvell,armada380-thermal";
reg = <0xe4078 0x4>, <0xe4074 0x4>;
status = "okay";
};

- flash@d0000 {
+ nand: flash@d0000 {
compatible = "marvell,armada370-nand";
reg = <0xd0000 0x54>;
#address-cells = <1>;
@@ -577,7 +577,7 @@
status = "disabled";
};

- sdhci@d8000 {
+ sdhci: sdhci@d8000 {
compatible = "marvell,armada-380-sdhci";
reg-names = "sdhci", "mbus", "conf-sdio3";
reg = <0xd8000 0x1000>,
--
2.11.0.24.ge6920cf
\
 
 \ /
  Last update: 2017-02-01 10:04    [W:0.042 / U:7.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site