lkml.org 
[lkml]   [2017]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/4] net: phy: Initialize mdio clock at probe function
From
Date
On 01/17/2017 08:14 AM, Yendapally Reddy Dhananjaya Reddy wrote:
> Initialize mdio clock divisor in probe function. The ext bus
> bit available in the same register will be used by mdio mux
> to enable external mdio.
>
> Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>

David, this patch should go through your tree (but we forgot to CC you),
patch in patchwork is here:

http://patchwork.ozlabs.org/patch/716281/

Thanks!

> ---
> drivers/net/phy/mdio-bcm-iproc.c | 6 ++----
> 1 file changed, 2 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/phy/mdio-bcm-iproc.c b/drivers/net/phy/mdio-bcm-iproc.c
> index c0b4e65..46fe1ae 100644
> --- a/drivers/net/phy/mdio-bcm-iproc.c
> +++ b/drivers/net/phy/mdio-bcm-iproc.c
> @@ -81,8 +81,6 @@ static int iproc_mdio_read(struct mii_bus *bus, int phy_id, int reg)
> if (rc)
> return rc;
>
> - iproc_mdio_config_clk(priv->base);
> -
> /* Prepare the read operation */
> cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) |
> (reg << MII_DATA_RA_SHIFT) |
> @@ -112,8 +110,6 @@ static int iproc_mdio_write(struct mii_bus *bus, int phy_id,
> if (rc)
> return rc;
>
> - iproc_mdio_config_clk(priv->base);
> -
> /* Prepare the write operation */
> cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) |
> (reg << MII_DATA_RA_SHIFT) |
> @@ -163,6 +159,8 @@ static int iproc_mdio_probe(struct platform_device *pdev)
> bus->read = iproc_mdio_read;
> bus->write = iproc_mdio_write;
>
> + iproc_mdio_config_clk(priv->base);
> +
> rc = of_mdiobus_register(bus, pdev->dev.of_node);
> if (rc) {
> dev_err(&pdev->dev, "MDIO bus registration failed\n");
>


--
Florian

\
 
 \ /
  Last update: 2017-02-01 23:09    [W:0.091 / U:3.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site