lkml.org 
[lkml]   [2017]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 5/8] ASoC: codecs: Add sun8i-a33 binding documentation
On Tue, Jan 31, 2017 at 11:05:49AM +0100, Mylène Josserand wrote:
> Add the documentation for dt-binding of the digital audio codec driver
> and the audio card driver for Sun8i-a33 SoCs.
>
> Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
> ---
> .../devicetree/bindings/sound/sun8i-a33-codec.txt | 75 ++++++++++++++++++++++
> 1 file changed, 75 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt
>
> diff --git a/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt b/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt
> new file mode 100644
> index 000000000000..2425c74bce7e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt
> @@ -0,0 +1,75 @@
> +Allwinner SUN8I audio codec
> +------------------------------------
> +
> +On Sun8i-A33 SoCs, the audio is separated in different parts:
> + - A DAI driver. It uses the "sun4i-i2s" driver which is
> + documented here:
> + Documentation/devicetree/bindings/sound/sun4i-i2s.txt
> + - An analog part of the codec which is handled as PRCM registers.
> + See Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
> + - An digital part of the codec which is documented in this current
> + binding documentation.
> + - And finally, an audio card which links all the above components.
> + The simple-audio card will be used.
> + See Documentation/devicetree/bindings/sound/simple-card.txt
> +
> +This bindings documentation exposes Sun8i codec (digital part).
> +
> +Required properties:
> +- compatible: must be "allwinner,sun8i-a33-codec"
> +- reg: must contain the registers location and length
> +- interrupts: must contain the codec interrupt
> +- clocks: a list of phandle + clock-specifer pairs, one for each entry
> + in clock-names.
> +- clock-names: should contain followings:
> + - "bus": the parent APB clock for this controller
> + - "mod": the parent module clock
> +
> +Example:
> +codec: codec@01c22e00 {

This is redundant with the full example below.

> + #sound-dai-cells = <0>;
> + compatible = "allwinner,sun8i-a33-codec";
> + reg = <0x01c22e00 0x400>;
> + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
> + clock-names = "bus", "mod";
> + status = "disabled";
> +};
> +
> +Here is an example to add a sound card and the codec binding on sun8i SoCs that
> +are similar to A33 using simple-card:
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "sun8i-a33-audio";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,frame-master = <&link_codec>;
> + simple-audio-card,bitclock-master = <&link_codec>;
> + simple-audio-card,mclk-fs = <512>;
> + simple-audio-card,aux-devs = <&codec_analog>;
> + simple-audio-card,routing =
> + "Left DAC", "Digital Left DAC",
> + "Right DAC", "Digital Right DAC";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&dai>;
> + };
> +
> + link_codec: simple-audio-card,codec {
> + sound-dai = <&codec>;
> + };
> +
> + soc@01c00000 {
> + [...]
> +
> + codec: codec@01c22e00 {

audio-codec@... and drop the leading 0.

> + #sound-dai-cells = <0>;
> + compatible = "allwinner,sun8i-a33-codec";
> + reg = <0x01c22e00 0x400>;
> + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>;
> + clock-names = "bus", "mod";
> + status = "disabled";

Drop status from examples.

> + };
> + };
> +
> --
> 2.11.0
>

\
 
 \ /
  Last update: 2017-02-01 18:31    [W:0.110 / U:3.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site